Thank you. Unfortunately it is not used very often.

I will make one soon, once my basement gets out back together after the flood.

Thanks for watching

Thank you

Me too! Thanks for watching.

I will have to work on one. Maybe I will do that during the next live stream.

@@TVJAY Thanks

I personally couldn't do it

Thank you for the feedback

Thank you!

It really depends and could be one of the following.... 1) The top of the tower is already used for something else. 2) They are renting the space and the higher up you go, the more it cost. 3) The tower was rebuilt and the license could not be modified. 4) The license was moved and based on the equipment the station owned that is the what made the most sense. 5) The coverage area isn't that big so they did not need to go all the way up to get the coverage they were allocated.

Yes

Thank you

Thanks for watching. I took a bunch of photos today so I will share what our HVAC and power system looks like next week. In other words I plan on doing a virtual tour of the transmitter site.

That was so weird and very unexpected

I know it doesn't work with your schedule

Thank you, glad you enjoyed it

You would need to use a capture device. I prefer BlackMagic DUO 2 cards. They are designed to go inside a full size PC. If you only have a laptop then you would have to use some sort of USB 3 or Thunderbolt converter.

We use Sencore demodulators (also known as IRDs) at work to receive satellite and microwave feeds. We then feed them through AJA FS-1 units to frame sync them. I don't think you can feed the ATEM an IP feed.

Please feel free to share your experiences with BMD products here if you would like. Thank you for watching.

@@TVJAY I've had issues with the Atem Extreme while recording & streaming similar to what Joe explained during your stream. I had strange issues with my 2 M/E, had to send it back not once but twice. I'm now on my 3rd 2 M/E that is sort of stable. Periodically, I have to recycle power because it hangs on boot. I purchased a new HyperDeck this past January. Sent it back immediately because all it would do is quick flash the Record Button. Shortly after that I purchased the Web Presenter HD. Like the 2 M/E, it is sort of stable. Haven't had any issues streaming with it but there are times when it just is not found by the Web Presenter desktop software. When this happens, a power cycle usually fixes the problem. Overall, for what I do, I can deal with these BM idiosyncrasies. But I totally get what you are saying when it comes to mission critical environments and importance of reliability.

​@@QuikTechSolutions Thank you for sharing your experience. I turn off all of my BM gear every night after I stream and I don't have any issues but I am also using older gear.

@@TVJAY I also turn off all my gear as well after each use. I fire things up when I get into the studio after being off all night. Even after everything is freshly booted, I sometimes have to power cycle the 2 M/E or the Web Presenter. As a rule of thumb, I just power cycle the Web Presenter just before going live. Shouldn’t have to do that, but I do to avoid issues at the start of show. Now, I have one of the original HyperDeck Minis in the rack that has performed flawlessly but it’s older hardware. There’s definitely something to be said about that. It’s almost like the older hardware was better designed & built to last. Seems like the newer gear with all the bells & whistles have a tendency to be problematic. Hmmmm 🤔

@@QuikTechSolutions it does seem that the older stuff was made better or at least has better firmware.

That is okay, thank you for watching.

Well that is good to hear that they are going to have it baked in but I agree that it is very frustrating that it wasn't included at launch. I honestly think the easiest thing for BMD to do is launch a stand alone program to as the NMOS controller for every device on the network, kind of like UniFi's controller but maybe I am overlooking something. Thank you for the reply.

I agree. It appears they are also baking this into their $2800 10G video ethernet switch. It has a very similar select/take interface as the videohub master control pro. Ironically, if you read their documentation verbatim, there is no product with the name they listed, although you could assume it's referring to the button-only version of their video hub smart control pro. Having a separate program -- maybe in their video hub software family -- would be perfect.

I was just doing LAN to LAN as these units don't have a WAN port on them. I have done a 10 mile link before at work that lasted for almost 7 years but that was on tall buildings. How high are you able to put your antennas? You are going to need some height in order to go 2.5 miles.

@@TVJAY one home is on top of a hill about 700 feet higher than my other home at 2.6 mile distance. Clear line of sight from the roof of each home. Discovered the slave device radio isn’t functioning. Connected to both directly and the 5g radio is not functioning on one device so I need to figure out how to contact them to return one of the devices.

Honestly I am interested in learning more too. Thank you for watching.

Thank you for watching and I am glad you found it informative.

We send the audio over a STL (Studio Transmitter Link) which is a wireless signal that goes from our studio on campus to the transmitter site.

We could also send it over the Internet, if we wanted to.

No problem...I hope you had fun.

Thanks for watching!

I am sorry but this video was shot on my phone.

Thank you for watching

Thank you

Oh my, I can only imagine.

Thank you. I think showing the process can be very helpful to people who are learning or want to replicate what I am doing.

Not that I know of. That is why I am thinking about making one.

your facebook page sir.

Cool

I keep that private

How i can learn from you

@@Cchannel053watch my videos and ask questions, especially in my live streams.

Thank you

Thank you for watching and yeah, it gave me a couple of surprises tonight.

Behringer Xenyx 1204USB Mixer with USB