6 ай бұрын
Пікірлер
@monkey123dog Күн бұрын
Can anyone help me with a servo link replacement? Any suggestions for parts?
@sammybaka 8 сағат бұрын
The two links connecting the knuckles to the tie bar are in MB005.
@tarik916 Күн бұрын
That's awesome! I recently got a buggy and am having fun on my garage track. Have you experienced an issue with rolling tires off of the rim? From my first drive, it happened multiple times per session on my carpet track. With as much power as you have, I assume you would have the same issues unless your tires are glues (or something else). Thanks.
@sammybaka Күн бұрын
Thanks. Yeah on high traction and high demand conditions, you need to glue the tires just like the larger scale cars. It's common to use CA glue. I read it's possible to use tire tape (double-sided tape) to help secure the tires, but not as well as using CA glue.
@tarik916 Күн бұрын
@@sammybaka Ah, that makes sense. Thanks!
@nickswiniarski8308 4 күн бұрын
Hi, do you have details on where to purchase the metal servo saver or the brand and model number you used? Thanks
@sammybaka 2 күн бұрын
The brand is GPM and I think this might be tough to find today. Originally I bought it at www.asiatees.com/display?id=25689
@popitn2nd 17 күн бұрын
Hi! I’m building a car using MR03 evo circuit board with PN 2.5w chassis. My question is… can i use a brushed motor with MR03evo circuit board?
@sammybaka 16 күн бұрын
Yes you can. You will need to use the ics usb dongle to program the esc for brushed mode.
@yujin4727 20 күн бұрын
Well done on this video! Straight to the point and very well presented info.
@sammybaka 14 күн бұрын
Thank you!
@space_cowboy007 22 күн бұрын
Hello, you test with mr03 rwd, which is FHSS, yes? I don't understand why the multiprotocol module with the radiolink rc4gs is needed as the radio is advertised to natively support fhss.
@sammybaka 21 күн бұрын
fhss itself is not a protocol. most modern protocols from companies like futaba, sanwa, flysky, etc use different proprietary protocols, but they are all built on top of the fhss modulation method.
@Honda-Freed 23 күн бұрын
Hello. Recently I bought the Mini Z NSX with MR-03 (Narrow) RM chassis. May I know if this First Mini Z “Samber Truck body”could totally fit on it without any modification works on chassis, please? Thanks for sharing.
@sammybaka 21 күн бұрын
RM pod will let you run 90mm wheelbase, so that part is good. You will need to get rims with narrower offset. The truck body is narrower than nsx.
@Handlefosho 25 күн бұрын
Direction/front suspension left right load w steering *
@Handlefosho 25 күн бұрын
It drifts you just gotta drift it like stock rwd car You can do w rubber rear tire Touch throttles to feel rear suspension and steering to feel front Set gyro however you like Once you feel rear suspension well you can pulse .. understand that as soon as you off throttle it’s braking so time next pulse according to hang time
@Handlefosho 25 күн бұрын
Freaking love it
@Handlefosho 25 күн бұрын
💯
@popitn2nd 27 күн бұрын
Is it possible to have the PN 2.5W chassis with 98mm base. I want to use the Audi R8 body. In this case what motor mount should i get? And compatible friction damper or rear shocks kit. Thanks!
@sammybaka 26 күн бұрын
Yes, and in fact the vast majority of PN2.5 builds I've seen are 98mm. You just need the right motor pod. If you are building from scratch, I would get the PN v5 lcg 98mm mount mount, plus the PN multi length damper set. This combo will work for an R8 body.
@popitn2nd 26 күн бұрын
@@sammybaka I’m also thinking of upgrading my Kyosho MR03 chassis to PN2.5w chassis, will my MR-03 Route 246 MM Aluminum Motor Mount work? (Part#: KYOR246-1355 ) Since i already have these parts available? Basically just switching every parts i have from my MR03 over. Will this work?
@sammybaka 26 күн бұрын
Basically the front and backend of an MR-03 will fit fine onto the PN chassis. Your R246 motor pod will work.
@michelwolf5866 28 күн бұрын
Thanks for showing
@EpikFeddie 29 күн бұрын
what upgrades can i possibly do to turn it into a drift car?
@sammybaka 27 күн бұрын
Unfortunately, MR-03 doesn't have enough steering angle to become a rwd drift car. Check out kzfaq.info/get/bejne/e9Gga7lpmpuqdok.html where I tried and failed drifting one.
@DJIDSYSTEMX2 Ай бұрын
well i know this is an old thread but I understand but the lack of not finding out that there are parts to camber the steering knucle and tie rod kit and more plus u have the same chassis with the gyro I been trying to find and now I know what it looks like , but you can get the gyro unit 2.0 which I got by mistake because I needed the updated receiver unit 2.0 to match the gyro unit 2.0 I got by mistake and it said it on the box optional but with so much researching this only the MZW446 (color: Yellow-green-purple-purple) gyro will only work with the receiver unit 2.0 MZ414B which will not work with the original receiver, now the original receiver that come with the MR-03W-MM is the MZ414 so the color wires that this one on video has is the one that works with the original receiver which is (Blk-Red-White-Blue) now I know what it looks like ,now just because you want it tandem yay for you hey go buy one ,I just rather build one if there's a will there is a way but it is a good understanding video don't get me wrong , good part of this video I found what the gyro wire color looks like for the original receiver on the original chassis I have so I'm happy , so if Mods can help cool if Mods that you your self can do even better including if u have a 3D printer and a Dremel kit plus I even found some motor that could work a little better than the stock and they are the same size tamiya tuned motors so it can be a drifter for those that rather just buy one good for u either way its my opinion and I know it will make it even if its just slightly close lol 😅🤔
@sammybaka Ай бұрын
Kyosho has made the gyro line very confusing. Photos are down on this page, but it's useful for figuring out which gyro to get: rc.kyosho.com/en/gyro-matching
@DJIDSYSTEMX2 Ай бұрын
@@sammybaka well thanks but i tried but a few items are discontinue so I have to now search I don't mind doing on what I said in the message but thenew ver. 2.0 receiver $38 because I have gyro but like I said in ur video has the correct one when I look at the connector wire color so I found it but online has it for $79 down to $49 for the gyro that u have that will fit in mine also
@moq4686 Ай бұрын
Hi could u tell me from where u got the shocks they look good on track
@sammybaka Ай бұрын
I got these big bore shocks (MBW037) on nitrohobbies.com, but they are no longer available there. amainhobbies has them.
@moq4686 Ай бұрын
@@sammybaka thanks ❤️
@Electroot Ай бұрын
I bought this charger but i have 19.5v 160watts adapter when i plug it input voltage shows 19.50v and cut off 11v should i increase the cutoff voltage from 11 to 19v??
@sammybaka Ай бұрын
When using a wall charger i don't think the cutoff setting is important. It's needed when using a 3+s lipo battery as input power to b6neo to protect that supplying lipo.
@MysticRiverRC Ай бұрын
What a great build. I really enjoyed the video. Liked and subbed
@sammybaka Ай бұрын
Thank you for your support!
@rogerbahr9117 Ай бұрын
Watched your video. I like it alot. Got a few questions tho. I have 2 da3s that I drift but have a hard time fitting everything in it to run the mini z bodys so I run plastic modles car bodys. Is this one easy to set up for a mini z body or should I look at another one.
@sammybaka Ай бұрын
I'm not familiar with DA3S so i'm not sure its range of track width. I assume there are ways to adjust the length of the suspension arms. What mini-z bodies are you trying to fit? They come in quite a range of width as well.
@rogerbahr9117 Ай бұрын
@sammybaka Subaru Sambar Kei Truck. Is the gld a good car? Is it good out of the box or do I need upgrades to make it drift good
@sammybaka Ай бұрын
@@rogerbahr9117 The kei truck is going to be challenging because it's very narrow (in mini-z terms, max of 0.5mm offset with narrow wheels front and rear with narrow front track width), plus its rear bed hangs pretty low. It's almost the most challenging Mini-Z body to fit. GLD is at this point an old design; it's good but really needs/benefits from some key option parts. Because of that, I'd consider it too expensive vs other options now.
@rogerbahr9117 Ай бұрын
@sammybaka is new option on chassis would you chose?
@sammybaka Ай бұрын
@@rogerbahr9117 I'm not familiar with the latest ones but it seems that a lot of people like the MA Racing MA24.
@user-lw3jb3vy5f Ай бұрын
わこ
@BeauFPV Ай бұрын
the wheel arch has been cut incorrect ?
@sammybaka Ай бұрын
Yup. I didn't put the body post holes correctly so it was offset towards one end. The body ran awesome but the build wasn't the best for sure. Recently I built up the protoform p63 body and that came out nicely.
@BeauFPV Ай бұрын
@@sammybaka i just decided to go with that body shell ,everything came out really nice but then i also made the mistake of putting holes in the wrong place lol! i should have done holes before painting! love all your content by the way bro!
@sammybaka Ай бұрын
Thanks! Yup my lesson learned here is also to trim and ream while the body is still clear. I'm going to have a build video for the second lexan body that will lead to better results!
@GuillermoRodriguezM Ай бұрын
Nice build. I hace a question, what charger do you have?
@sammybaka Ай бұрын
Thank you. Currently i use skyrc b6neo.
@ThiBor64 Ай бұрын
I know this is quite an old video but which servo is better in the gt24tr the wltoys 5g or the hs5055mg? As i notice you have used both at some point or another.
@sammybaka Ай бұрын
I find the wltoys 5g fit better, and is much cheaper. It works just as well as the hitec in my opinion. I definitely recommend the wltoys more.
@Christopher-gx1vp Ай бұрын
Hey Sammy, on your mr03, I noticed the motor pod is extended far more than out of the box, what wheel base is that in this video?
@sammybaka Ай бұрын
Indeed. I have the RM motor pod installed for a 90mm wheelbase. Originally this was an audi r8 with MM pod at 98mm.
@russwinn8812 2 ай бұрын
Thanks for sharing! ...The new track is open near me, and the mini z world is a blast! ...Have you tried the option house aluminum shocks? I really like mine using 3k diff fluid.
@sammybaka 2 ай бұрын
Lucky and enjoy! Option house like the kyosho alloy or the big bore shocks? I run the big bore shocks in the other buggy. They are fine but I also really like the stock plastic oil shocks.
@russwinn8812 Ай бұрын
@@sammybaka I was referring to the aluminum alloy shocks. They're really smooth, and I like the silver look....BTW, my first race in 12 years was last night...mid-pack finish, but I had an absolute blast!....Keep the great vids coming!
@smokeyflapjack 2 ай бұрын
Great video but no mention of what tires your running front and rear? This is 90% of your traction rolling fix. PN medium and front im assuming but what in the rear? Thanks!
@sammybaka 2 ай бұрын
That's indeed an oversight. For the RCP track I run on, I use 11mm marka 5 slick for the rear, glued to the rims. Front is the standard PN KS med slick, also glued to the rims and CA-glued on the side walls.
@deezeejoey 2 ай бұрын
This video convinced me to buy one of these. I didn't think carpet would work well but looks like it does. Car comes in on Monday.
@sammybaka 2 ай бұрын
Enjoy! Office carpet works pretty nicely for grip and drift. For drift, it keeps the noise level down so it's very convenient.
@markod1977 2 ай бұрын
Wonderful build!
@sammybaka 2 ай бұрын
Thank you!
@Okahui 2 ай бұрын
Hi wondering if a 20A esc would be good enough for the 1:10 brushless motor?
@sammybaka 2 ай бұрын
20A should be more than enough as the truck is very lightweight. Which ESC are you considering?
@Sidecharacter1912 2 ай бұрын
Nice
@madsrcbuggy 2 ай бұрын
This is great! It's a good looking buggy and seems more than capable in those conditions! I started thinking about getting a Mini-Z buggy for next winter, purely indoor running... Looks like we can have just as much fun on smaller scale also, he he!
@sammybaka 2 ай бұрын
Yeah it can handle itself quite well! I'd still be careful with conditions that can throw sand and small rocks into the back of the drive shaft but I think with the chassis mod and standard servo, it can handle outdoor more easily.
@SchmingyYT 2 ай бұрын
This is such an awesome chassis. I destroyed the servo gears on one of my buggies just driving it on what I thought was a clean driveway, but it didn't take much. A small piece of grit in the tiny gears and the steering was done. While I fixed it, I really love the idea of using a standard servo so I can run more configurable electronics compared to the stock ones with brushless especially. Love the constant updates! Can't wait for the chassis to be more widely available.
@sammybaka 2 ай бұрын
Yeah I love it! Being able to use a standard 6g servo is fantastic and eliminates a major vulnerability of the chassis. The bulk heads are reasonably sealed by bearings. The only thing remaining is the pinion/spur surface. At least that part is easily serviceable if needed.
@ZackoTv 2 ай бұрын
Anyone know the name of the white connector at 4:11 ? I need to make a cable more long but its not a classic jst-zh :(
@sammybaka 2 ай бұрын
I just examined the connector closely and busted out the caliper. I'm now pretty sure it's jst-zh 3-pin 1mm pitch.
@user-xg9fp7cx5o 2 ай бұрын
I bought this V2 Chassis a little bit early, the steering structure is still V1 type🥲
@sammybaka 2 ай бұрын
That's not ideal but I think the difference is minor and not essential. If you want, those thrust bearings can be purchased for about $1.
@user-xg9fp7cx5o 2 ай бұрын
@@sammybakaI received new steering structure from Sai，it‘s much much much better than before. 😮
@russwinn8812 2 ай бұрын
Thank you so much for this!...You've shown the only explanation for the gear/plate combos that I could find....where can I get a copy of it online?
@sammybaka 2 ай бұрын
Thanks! It also took me some time to find this, but it's available on the instructions of MBW031. Check out the images on kyoshoamerica.com/mbw031.html
@russwinn8812 2 ай бұрын
Awesome!...Thank you so much for this.
@russwinn8812 2 ай бұрын
Awesome build!! Thank you for showing it!
@sammybaka 2 ай бұрын
Thank you! I really enjoyed this build!
@russwinn8812 2 ай бұрын
Hello Sammy, I have been going through your old videos trying to educate myself on the Mini Z...A brand new track and shop just opened by me, and this is my first mini (Kyosho buggy)...I have been tinkering with RC cars for 40 years, but this is a new game for me. The subject was brought up about 1/24 drag racing, and I have not seen anything on them....Is this even a thing?....Thank you for all of the good info!
@sammybaka 2 ай бұрын
Welcome to the mini-z rabbit hole! Having access to a track is fantastic news. Regarding 1/24 or 1/28 drag racing, I'm not aware it's a thing unfortunately.
@mc26275 2 ай бұрын
Could this work in the Sai Lai buggy chassis?
@sammybaka 2 ай бұрын
For sure, but please note that almost all sensored motors do not have the D-shaped end bell that fits into the buggy motor mounting system. For example, this GL sensored motor has a flat end bell. Therefore, to use this motor, you will need to drill two holes in the front motor plate so you can use m2 screws to secure the motor.
@mc26275 2 ай бұрын
@@sammybaka Thank you for responding. Presumably, the ESC would work fine with a Kyosho XSPEED brushless sensored motor?
@sammybaka 2 ай бұрын
@@mc26275 Actually I'm not sure. Kyosho did something weird with the new sensored motors where the sensor cable is 6-wire, rather than the usual 5. I believe the extra wire is for temperature telemetry but regardless it's certainly not a drop in option for this ESC.
@mc26275 2 ай бұрын
@@sammybaka Thanks for the insights!
@DudeWiththeClue 2 ай бұрын
awesome vid Sammy! I have been wondering about possibly changing to a sensored motor, but this may have to be an upgrade in the future.
@sammybaka 2 ай бұрын
Thank you. If you are planning to run a sensored system, this is a great choice. This is the ESC I see most often on cars being raced.
@TheShopMiniRC 2 ай бұрын
Well done. I really wish @Hobbywing would fix the sensorless issue on these
@sammybaka 2 ай бұрын
Thank you and I totally agree. It's just a surprising miss from hobbywing.
@russwinn8812 2 ай бұрын
Hello, very nice job on the car...Thanks for sharing... Have you tried using the blue painters tape for masking?... I prefer simple, or "old school" paint jobs over anything modern. I've just purchased my first mini z, and the first thing I changed was the body....one color, and I used a Cricut machine to make my own decals for it.
@sammybaka 2 ай бұрын
Thank you. I haven't tried other mask tapes before. You might want to test it on a plastic spoon to see how precise the masking is at this scale.
@giannidelmonte9715 2 ай бұрын
Bonjour Ou peut on acheter ce chassis ? Merci
@sammybaka 2 ай бұрын
To buy the carbon chassis, contact Sai Lai by Facebook DM (facebook.com/sai.lai.37625) or Whatsapp (+85291911193). He makes these chassis and sells them directly. He can help with any question you may have and send you a paypal invoice.
@explorerrobotics7269 2 ай бұрын
So you remove the pinion from the original motor and put it on the new motor? Can you share a link of the pinion remover? How did you mount it on the new motor? Did you use glue?
@sammybaka 2 ай бұрын
Yes you can reuse the pinion from a stock gt24. These motors at these scale all use 2mm motor shafts. Plastic pinions like this can be pressed on using a flat hard surface. No glue. The pinion remover is available from different places but here's one www.aliexpress.us/item/3256804590153666.html.
@explorerrobotics7269 2 ай бұрын
@@sammybaka Great. Thanks!
@Bobperez182 2 ай бұрын
Is there a receiver that will bind to the original Kyosho transmitter that these come with or are you using something totally different?
@sammybaka 2 ай бұрын
I use the flysky nb4 transmitter paired with an nb4 afhds3 nano receiver. If you are looking for a nano receiver for the kyosho kt531p transmitter, you need this www.wolframrc.com/product/kyosho-kt-531p-compatible-nano-receiver-mxo-racing/1174?cp=true&sa=false&sbp=false&q=false&category_id=211
@Bobperez182 2 ай бұрын
@@sammybaka awesome thanks for the info
@lecoindesmodelistes3741 2 ай бұрын
Which furytek esc do you use ?
@sammybaka 2 ай бұрын
I'm using furitek momentum v1 here.
@QUIET100 3 ай бұрын
Do you have to do this?
@sammybaka 2 ай бұрын
After a few sessions on a track, I'd consider serving a ball diff like this because dust and stuff start getting in between the plates. Balls should last pretty long unless the diff ran too loosely.
@zacbrewser 3 ай бұрын
sammy if we dont get to hear your voice im gonna cry lol been following you for years and its my first question everytime i watch your videos
@sammybaka 2 ай бұрын
Thank you for the support! It will happen one day, even just as an experiment. It's 2x the work to include voice in the production because my video isn't just one long take.
@zacbrewser 2 ай бұрын
@@sammybaka it can be! No one is bothered by listening to you think out loud while you work something! Trust me everyone that is here is so deep down the rabbit hole we would all love it
@jasoncannon1875 3 ай бұрын
The only reason I'm watching videos is so I don't have to read lol
@speedhead 3 ай бұрын
cool build. good edit very calming to watch as i sipped my coffee this AM. cheers.
@sammybaka 3 ай бұрын
Thank you. This was the funnest build I'd done in a while!
@matthowe2703 3 ай бұрын
i just got the cyan MPower kit for mine, it is so nice
@sammybaka 3 ай бұрын
mpower parts look really still made! enjoy!
@matthowe2703 3 ай бұрын
@@sammybaka I got the cyan parts, it looks amazing