Nice but how do you know where your screws were drilled into the van frame ? Or is the shelf just holding on the white 'cladding'??

What is the green stuff called

Quick tip - make a funnel out of aluminum foil to divert the torque converter fluid. Makes that drain part a lot easier :)

How did you figure out what size fuse to use on your battery?

Thank you for making this video! I'm planning to do this to my 2004 Dodge Sprinter as well. Do you know what the type of latches are called on the cabinets inside your van?

You are annoying! No singing please!

Love the video man. Super helpful.

I'm using 0 guage wire on everything so I don't get any KZfaq comments.

Never use a fuse rating higher than your wires can handle

I learned so much from this video thank you! This is my system I’ve planned for my semi truck. 3000w 48v inverter 3000W/48V=62.5A 62.5A x 1.25%=78amps Round up to a 80amp fuse Wire size must Handel 62.5A Wire: 4awg 120amps max circuit breaker: 80amps

Very helpful, thank you! I paired this video with the "rumble strip noise" fix-- worked like a charm!

Thanx for the video. Even though the service manual says to remove the heat shield, as you did, I've been chaning my air filter without doing so. Tight maneuvering, but it can be done.

I just completed this install using this videos method of tapping into an existing fuel line for the aux heater, and it worked!! Thank you! I did this on a 2006 t1n 2500. Because I have the webasto and not the Chinese heater, although the 6x6x6mm T-barb worked, I did need one piece of 6mm sleeve tubing (only 4mm sleeve connectors come with webasto) so I also ordered that part. Everything went pretty smooth and was able to pull out the fuel line from the espar pump and reuse the sleeve (after cutting away the clamp) without having to cut the line, making the setup less complicated. I'm impressed with this method and it saved me $400 from having an outfitter do it.

Funny thing is that Mercedes owner’s manual doesn’t say anything about the filter renewl except ”go to the dealer” and Haynes repair manual is equally silent of this matter! Whhaaaat? Changing air filters is basic stuff in every car!

Thanks for the video. However I can’t remove the filter housing cover even when the 2 metal clips are opened. The cover just won’t slide to the right. Forcing it to move is risky as the plastic material of the housing and cover is quite easily damaged. I don’t know what to do next.

I have saved this video for reference. Great explanations👍

Will circuit breaker switches then turn off when a certain temperature is reached? (on their own?)

Thank you for a detailed and easy video to follow. I will now tackle my Oil change on my 113 tipper. Edit : Job complete and the tipper is much happier Thanks again

It’s not recommended to change atf filter. Esp if you haven’t been doing it regularly.

What brand is the heater? The link doesn't work anymore. I am about to buy a Lavaner pro 2k

heat rises. You had it right the first time. Just add a u s b fan To extract from the top.

NICE Video👌

What did you use to MacGyver the turbo hose? Literally need to do that right now!

Excellent!

Super easy. Just make sure the wire harness fully seats. I did mine and drove to work and forgot tools. Long story short, had to Uber home

I'm crying because the music--Why?

The brackets alone are $98.50?!

After watching you finally prepared to wire my boston whaler 15Ft proyect, thanks

Link to the three o rings?

Thanks , I really appreciate the video! I'm considering running about 15 ft of wire from my Jackery 240's 12v socket to the back of my Transit Connect. I want to run a sound bar (via a 200W or 300W converter at the back), some LED lights (including USB), a 12v or USB rechargeable fan, plus 1-2 other USB things - like a phone recharger... ALL from a switched splitter. Do you think 16 awg would suffice? Do I need a fuse?

Thank you for your education and teaching

This is very helpful thank you for sharing!

music annoying!

what is that lower sensor on the air filter housing lid, the sensor below the MAF sensor? a manual said it was the air intake pressure sensor, but i cant find this part to buy it

added a showering bird , extremely well done

🙏🏽🙏🏽🙏🏽very helpful! Thanks!

Clear and concise. I appreciate you! 🫡💯

What happened to you? Hope all is well!

My mechanic broke my air box cover locator and said it will be ok 😢😭

We did Arches in 2012 when we did a road trip of USA. Amazing. James/ Sydney/ Australia.

Hi beautiful couple. Mr. Get Mrs. Pregnant. You need to be a man and a father. Hurry up already. God bless you both.

What is the red Clio that comes in the kit?

I understand it’s one’s own video but the music is awful

They are e10 bolts. Just took mine off. Who knows. Yours may have been changed before.

They must of updated the chart because it does not match your chart.

I love your videos, I just found this channel.; I guess you guys stopped? Where are you guys?!!!

Great

Thank you 🚐✨

so is cold measurement after the 2 min warmup?

Great video! Was really helpful to get my heater installed in my 118 wb. It’s been getting pretty cold her in Utah and when I fired it up over the weekend I got an e 08 error which I think maybe fuel gelling. Wondering if you experienced this and how you went about solving it?