This is great man you should make a clone wars style phase 2 clone helmet
@gleydsonbianquini3 күн бұрын
I made a STEVE MINICRAFT out of cardboard. Link below Fiz um STEVE MINICRAFT de papelão. Link abaixo: kzfaq.infoBTbq91rA8aw?si=RTkqErIoeJqOEa6O
@TristanMaker2 күн бұрын
That's really cool! Great work
@_Elexation_8 күн бұрын
Do you have any good tips to make extra details? Me and my group plan on being captain Rex, commander Cody, and commander bly. There’s quite a few details on the armor aside from the armor itself so what would be the best way to tackle those?
@blackrain99512 күн бұрын
I love these, came to the channel trying to figure out how to create a template for a specific helmet but no one’s made it before and I’m really struggling, anyone able to help?
@jeanabreshears596113 күн бұрын
nice job!
@FoamBattalionCosplay17 күн бұрын
I always love your work! Thanks for introducing me to the world of EVA Foam Helmets. You are to blame for my high foam expenses! 😂❤️
@TristanMaker17 күн бұрын
Hahaha I'm glad my videos could help you find a new hobby!
@UmmerDr17 күн бұрын
Nice helmet! And great editing of this short! Especially with the estimated time for each step
@TristanMaker17 күн бұрын
Thanks! I'm glad you like it :)
@raven501st518 күн бұрын
Question, can Ruston-oleum automotive primer work too ? or it’s just the Dupli.color primer. 12:36
@TristanMaker17 күн бұрын
Any brand of filler primer will work. But I found that the Dupli color sands a little better
@team_xbox3.03619 күн бұрын
Is there an tutorial how to attach the armor with it?
@gaawwwaws19 күн бұрын
How much foam did you need
@johncotey614119 күн бұрын
Can't quite see where the corrugated plastic sheets are being glued to inside the helmet.
@user-lc8yf7jg3h19 күн бұрын
Where do I find the templates?
@234assman21 күн бұрын
A DC -15 ? Don't have a e-11 blaster?
@sekurity331122 күн бұрын
Awesome,great work
@team_xbox3.03622 күн бұрын
Is there an tutorial how i can put on the armor without falling off?
@TristanMaker22 күн бұрын
Yes, go watch the 2nd half of the painting video for this armor. I show how I attached everything together.
@team_xbox3.03622 күн бұрын
@@TristanMaker thx man
@Michiii7523 күн бұрын
Nice
@TristanMaker9 күн бұрын
Thanks!
@fanimations236323 күн бұрын
Great work buddy! Thanks for this cool video!
@TristanMaker23 күн бұрын
Thanks! :)
@Titan-speakerman15324 күн бұрын
That helmet looks like the actual helmet they used in the show
@TristanMaker23 күн бұрын
Thank you! :)
@skylerostler203524 күн бұрын
You’re a genius man!!! Nice work!! :)
@TristanMaker24 күн бұрын
Thanks man! :)
@LittleGonzo2326 күн бұрын
How does that abdominal plate hold up overtime?
@wyattbuck8765Ай бұрын
ima be boba fett and either gonna use a mask that I'm building or a 3d print or I'm gonna be Darth Vader since I got a really nice mask from my aunt as a gift
@johncotey6141Ай бұрын
For the rangefinder, I drilled two small holes on the top, glued red acetate to the underside, glued a magnet to the underside (off set) and placed a small LED light on the magnet. Purchased a bag of 20 from Hobby Loby. My rangefinder now lights up!!
@Aphasia23Ай бұрын
But is it soft?
@lebaudy2970Ай бұрын
thanks you for you tuto and esty! do you think make Vador?
@Michiii75Ай бұрын
Would it work if i use 5mm foam for the 4 and 6 mm parts too??
@kuraokatana94Ай бұрын
How did you make the blaster?
@TristanMakerАй бұрын
It's all EVA foam! Unfortunately I don't have a tutorial for it.
@CrazyMinecrafter25Ай бұрын
i was wondering, how much foam do you need, and how much would it all cost?
@elyseredwine7846Ай бұрын
Would you consider making templates for attachments, like ARC/officer pauldrons, bandoliers, holsters, ammo packs, etc? I love watching your process videos and really want to try and make my own armor set using your templates!!
@BababooeyYcho66TАй бұрын
Hey Tristan, if you want to create good weathered paint chip marks, I recommend applying liquid latex with a toothpick over the black before you paint it orange. Then you can use your finger or something similar to rub it off after it dries. Creates pretty realistic scratches and paint chips.
@user-vy1ud7jf9zАй бұрын
Thst is amazing build .
@SymbioticSurgeАй бұрын
Can i use extra strong super glue instead of contact cement
@TristanMakerАй бұрын
You can but it's not recommended for helmets as there's tension pulling on the parts
@SymbioticSurgeАй бұрын
@@TristanMaker thanks, also im honoured that it was you who replied
@stachemo4740Ай бұрын
J’ai entendu l’accent québécois dès le début hahaha 🫡
@kodabear5056Ай бұрын
What millimeter EVA foam is that
@TristanMakerАй бұрын
Mostly 8mm with some other thicknesses.
@JAE_987Ай бұрын
Where can I find the templates for these? Or do I have to just cut them out the best I can?
@TristanMakerАй бұрын
The templates are available in my Etsy store which is linked in the product description
@LaRamaRamirez2 ай бұрын
can you make darth vader’s helmet out of eva foam pleaaaase
@junsake27972 ай бұрын
The use of EVA in all your vids never cease to amaze me. Would it be possible for you to make a Commanded Wolffe (from The Clone Wars) helmet? I would definitely love to see that and buy the template for such a helmet. Keep up the great work!
@carsonjolley14682 ай бұрын
It would be so cool to see you make halo armor of some sort
@blob18782 ай бұрын
i’ve been saying that i’m going to make clone armor for years now! maybe this year i’ll actually do it 😂
@Eternal_Flame_72 ай бұрын
Does anyone know where I can get free templates, if so pls help, much appreciated
@TristanMaker2 ай бұрын
These templates are for sale as I put a lot of work into them and the tutorial videos. Some other makers offer some free templates (Much Props, Andrew DFT, Ryzer) you can look into that.
@TheMayorOfSteelhead2 ай бұрын
Cool man, this is the best one out there for sure. Are you making any other camera accessories?
@TristanMaker2 ай бұрын
Thanks! I'm finishing a video for an 8" camera jib right now!
@NameHere28562 ай бұрын
For some reason, there is no option for the poster format when I attempt to print. Edit: problem fixed
@TristanMaker2 ай бұрын
Hi, please message me on Etsy and I'll help you with the issue
@NameHere28562 ай бұрын
@@TristanMaker no need, I've figured it out :)
@TristanMaker2 ай бұрын
Cool! Have fun crafting :)
@user-wn7xl6rp1q2 ай бұрын
Vaaaooooo👍👍👍🧚♀️
@johncotey61412 ай бұрын
Tristan, have you ever attempted to make the Scout Trooper helmet? I'm looking for a good template.
@kupambazua2 ай бұрын
Hey so how big should I print out the template? Thanks for the video
@NameHere28562 ай бұрын
He has instruction for that on the channel, it's also linked on his etsy.
@JemimakittenCat2 ай бұрын
What size do these end up being? Ive never made anything like this before.
@CrazyMinecrafter252 ай бұрын
i was wondering, how much foam do you need, and how much would it all cost?
@Cookiesdrawz2 ай бұрын
You are so talented wow Im try eva foam too!
@Cookiesdrawz2 ай бұрын
It's very hard but I think your the best at EVA foam
@michaelironstone2 ай бұрын
That's incredible!! You should make some Gondorian armour and a helmet for normal Gondor foot soldiers!!
@mlanyon95002 ай бұрын
so i have your template, how do i print them out as i only have A4 paper?
@TristanMaker2 ай бұрын
You can print the file on any size paper. Simply follow the printing tutorial video linked in the product description on Etsy.