Astro Pneumatic Nano Socket Sets. What’s different about them?

Рет қаралды 30,020

3 жыл бұрын

Astro Pneumatic Nano Sockets, Super Short Impact Sockets That Will Not Break The Bank!
Astro Pneumatic
1/2 Drive Metric 10-24mm Nano Socket Set www.amazon.com/gp/product/B01...
1/2 Drive SAE 3/8-1” Nano Socket Set www.amazon.com/gp/product/B01...
3/8 Drive Metric 6-19mm Nano Socket Set www.amazon.com/gp/product/B01...
3/8 Drive SAE 1/4-3/4” Nano Socket Set www.amazon.com/gp/product/B01...
3/8 Drive Torx Nano Socket Set T25-T70 www.amazon.com/gp/product/B01...
3/8 Drive Metric and SAE Hex Nano Socket Set 1/4”-3/4” and 6-19mm www.amazon.com/gp/product/B01...

Пікірлер: 124

@pophamlarry 3 жыл бұрын

I have this 3/8" set. Have had them for about 8 years I lost the 10mm and called astro for a replacement They shipped me one free of charge even though it was 100 percent my fault. They are very tough and durable sockets Worth every penny and astro is a great company I'll always purchase from astro pneumatic tool company.... great video Clay....😁

@KoonTrucking 3 жыл бұрын

That’s awesome

@lovetolearn5253 3 жыл бұрын

When astro got EricO on board they hit gold. I never knew astro made such a awesome tool until I seen EricO using and mentioning them. To be honest, the very few tools he mentioned all have been good tools and priced fair. I'm not taking anything away from clay. I'm just saying Eric really helped their sales. Look at mac and matco I wouldn't know or own half the macto tools I own if clay hadnt did a video.( hyper step, blue ratchet just to name 2)

@urahaman1479 3 жыл бұрын

Astro makes quite a few of Matco's tools but some are exclusive to matco..so yea they make good stuff

@michaspi 3 жыл бұрын

I have the 3/8” metric nano set. They live in the impact socket drawer but boy am I glad they are there when I need them. Also, mirin’ that Tub ‘o Towels in the background. Made here in Cleveland, Ohio!

@ericracette9716 3 жыл бұрын

Astro also makes a special ratchet wrench to go with the nano sockets its 17mm and 22mm and has a retainer ring in it to hold on to socket notice the groove in the socket for it makes for a great kit. Part number 78300.

@jamesu 3 жыл бұрын

Thanks for the video Clay. I have the 3/8 metric nano set. I have been waiting for a 1/4 metric set. I have several cut down 1/4 sockets waiting to be upgraded!

@billrau2398 2 жыл бұрын

Thank you for this valuable information it’s my first time ever knowing about Astro I will be purchasing multiple sets to fill up my toolbox thank you

@KoonTrucking 2 жыл бұрын

Glad it was helpful!

@markarmstrong3394 3 жыл бұрын

Clay i have had my nano for awhile now and love them !! I use them almost daily and never broke 1 yet !!

@oldman3388 3 жыл бұрын

Clay you always do the best job at showing us the cools tools either from a truck /web site and let everybody know whats the best bang for your buck. Like you say not everybody has 4 tool trucks show up once a week and we thank you for it keep up the great work .🔧🔧🔧🔧

@wdbland0820 3 жыл бұрын

Just got these this week. Very well made.

@ronmoore5632 3 жыл бұрын

Good evening Clay and ALL from the U/K . Just bought a Snap On CT761 Impact thanks to you We can`t get the range of tools & kit that you can. Wish we could. Stay safe ALL

@urbanjentry222 3 жыл бұрын

Yeap shame the us gets the better goodies than U.K.

@scottsmrcka2769 3 жыл бұрын

I bought those 1/2 drive metric sockets a couple months back. I also have 2 different nano impacts. Astro makes some really great tools and they hold up well. And best yet they are very affordable.

@butler386 3 жыл бұрын

Wow, fantastic p rices and with a lifetime warranty. Can't beat that.

@gregcothrum4045 3 жыл бұрын

Great video y'all have a great one and stay safe 👍

@get-fucxkxd-utoob 3 жыл бұрын

Those nano sockets look good

@brianreese9318 3 жыл бұрын

Some times I move your videos to save to watch when I can thanks clay

@aberdeenbelfry316 3 жыл бұрын

Found your channel about a week or two ago. Really enjoy it, thumbs up from Ontario Canada.

@KoonTrucking 3 жыл бұрын

Thank you! I appreciate you watching

@bobbark9345 3 жыл бұрын

They slide so smooth on that rail! It’s a great feeling isn’t it? Love mine

@SPMech1 3 жыл бұрын

Great Video.......Thanks Clay ! ! !

@derekhellam9861 3 жыл бұрын

Thanks for the info

@Terry_Baker 3 жыл бұрын

Great video as usual Clay. Got both SAE and Metric in 3/8 drive and use them daily in very tight spots..

@Terry_Baker 3 жыл бұрын

@Carlo Monte I would. Never know what you will run into.

@justinhayward5027 3 жыл бұрын

Was looking at those. Mostly for cam phaser bolts and tight place crank bolts. Astro is a good company.

@Rockardo_ 3 жыл бұрын

Was literally gonna buy this set the other day

@davereed6612 2 жыл бұрын

You gotta get the asto 78300 ratcheting flex head wrench made for these one sides a 17mm and the other is a 22mm and it’s got a retaining ring that locks these in via those little cutout slots on the socket base. And it’s about 40-60 dollars

@adamyoder5853 3 жыл бұрын

Wow those sockets are very reasonable. I will definitely be grabbing a set of the meteric

@christopheryoung826 3 жыл бұрын

Honestly I'm more intrested in the torx and Allen's. The allen side goes up well into the higher sizes that I often buy separately and I like complete sets. Wasnt even aware they existed thanks for the info!

@michaelgraybill905 3 жыл бұрын

Probably pick up the 3/8 drive metric set. Will need to see if I use them enough to warrant getting 1/2" or SAE. Great video Clay, and the price point is extremely affordable.

@billynolfe3621 2 жыл бұрын

I bought the 3/8" metric socket set. They seem to be good quality for a good price, but only time and use will tell if they are worth owning. I did order the 3/8" nano ratchet that is in the 1/4" body. They have the 1/2" drive in the smaller ratchet body as well.

@Spades7893 3 жыл бұрын

Bought these sets last year. Great buy for a very fair price. I have definitely gotten my money’s worth.

@pelotas56 3 жыл бұрын

I was bored during quarantine and bought the 3/8 and 1/2 sets. Once I was back to work twas a good buy 👍. Even bought the torx nano sets recently.

@cucolopez1942 3 жыл бұрын

Bought both 3/8 and 1/2 drive metric from Amazon a couple weeks back, have yet to use them but I know they are going to save my ass one day

@lilfish1308 3 жыл бұрын

How different in size are they ? (The 3/8 and the 1/2 set)

@cucolopez1942 3 жыл бұрын

@@lilfish1308 haven't measured exactly, but is about a 1/4 inch difference

@silinusvers 3 жыл бұрын

have you ever put one one on a universal joint and compared its length to a swivel socket?

@cucolopez1942 3 жыл бұрын

@@silinusvers no I haven't, but as soon as I do I'll update

@MrSupernova111 3 жыл бұрын

Great tools!

@SPMech1 3 жыл бұрын

Bought the Torx bits.......they are AWESOME ! ! !

@peltotablet1476 3 жыл бұрын

Got the metric 3/8 set. Handy sockets

@WilliamWonka 3 жыл бұрын

I’ve wanted the Astro XL damaged fastener wrenches for a while now. Always impressed with their tools, wish their vise-grip oil filter pliers would come back

@richb2229 3 жыл бұрын

The damaged fastener wrenches are a lot like The Capri extractor wrenches. The Capri has complete sets and stubbies.

@dieseldoctor9294 3 жыл бұрын

Them things look sweet! I bet they come in handy working on these newer cars that the engine bays are super cramped on! Great video sir.

@KoonTrucking 3 жыл бұрын

Thank you

@dylanphillips9745 3 жыл бұрын

Got myself a ct761 today I dont know how I lived without it

@bluefj-wc3vz 3 жыл бұрын

Lol They sure are nice aren’t they. I immediately bought the hex head model afterwards

@jwboilermaker 3 жыл бұрын

Wow. I don’t need anything that short but for the price you can’t beat it!

@cdshawn Жыл бұрын

It has to be an awesome company because I seen the one low profile 3/8 from 6 mm to 24 mm for 40 bucks on Amazon, I bought it and then before I know it they canceled my order and the price had changed to 79 bucks.. I wasn't mad cuz I thought it was a typo to begin with....fast forward a week and a half two weeks later the product arrives on my porch, and it quickly Rose to my favorite socket set.

@evanperry3699 3 жыл бұрын

I have the nano 1/2 and expert stubby 3/8. Like the astro more. Also have the pinless sets and love them.

@TheFirewall366 3 жыл бұрын

Watching you is an awesome way to spend my birthday 😆

@urbanjentry222 3 жыл бұрын

Happy birthday

@TheFirewall366 3 жыл бұрын

Thanks dude

@KoonTrucking 3 жыл бұрын

Hope you have a happy birthday! 🎁🎉🎈

@TheFirewall366 3 жыл бұрын

Thank you so much Clay. I’m really excited you took the time to respond to me. 😁Love the channel. Always have me coming back. Keep up the good work.

@kyleallen1835 3 жыл бұрын

Wow that’s really good

@epicragegaming2016 3 жыл бұрын

nano socket and a 22 mill wrench is a lot slimmer than any other socket and ratchet combo. wish the kex/torx were 17mm hex on the outside. i can think of many examples where they would be perfect.

@Isaiah-ft5nx 2 жыл бұрын

Just grabbed their triple square set. Haven’t used them yet but they seem very high quality! Only $40 on Amazon!

@87FoRunner 3 жыл бұрын

These are the bomb. I’ve had the 3/8 for about a year and use them semi daily. They have held up, even the black finish. I plan on getting the 1/2 soon.

@silinusvers 3 жыл бұрын

Say have you ever put one one a universal joint and compared its length to a swivel socket?

@richb2229 3 жыл бұрын

@@silinusvers Yes, for my universals the universal are slightly shorter but they are very close.

@silinusvers 3 жыл бұрын

@@richb2229 snap on has low profile universal sockets, this is where I got the idea from, thanks for looking. But being more realistic if I need something like that, the low profile socket with a flex head ratchet wrench 17mm or 22mm for the 1/2 is probably going to do the job better in a tighter area. I kinda bought these low profile sockets more for that idea than anything else. Especially because I plan on getting ratchet moon and S wrench to use with them also

@Ram2253spd 3 жыл бұрын

Might have to pick up a set

@claytonscheiber3493 3 жыл бұрын

You read my mind apparently. I was lookin at picking these up. I'm really liking Astro's products.

@KoonTrucking 3 жыл бұрын

Astro has some great stuff! And you can’t beat the prices !

@claytonscheiber3493 3 жыл бұрын

@@KoonTrucking yep, great stuff. I bought and did a brief demonstration video of their LED circuit tester. I also bought a set of their blue step bits. Real nice stuff, very affordable.

@yarbrouc1 3 жыл бұрын

I bought their digital tire gauge. Excellent!

@johnnyolson258 4 ай бұрын

Crying right now after hearing how cheap these were back then. Knew I should have picked them up back when you could get those 3/8 sets for 30 bucks. Kicking myself so hard right now

@larryborkstrom3580 3 жыл бұрын

I thing the torx bits for impact be good deal so I don't void the warranty on my good ones using them on a impact is the torx plus the new ones or standard torx

@TONYSTARK-jh2wu 3 жыл бұрын

I like astro the best because you can put a wrench on them

@tctwg1 3 жыл бұрын

Damn you Clay, off to buy these now 😂😂😂😎😎👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

@kendallas3705 3 жыл бұрын

I have the 3/8 set in metric and have put them thru the ringer. Still goin......

@johnnyramirez9082 3 жыл бұрын

Just purchased the nano metric

@malukojoexvi9957 Жыл бұрын

i might pick this set up soon on 1/2, are the Capri tool stubby sokets smaller/shorter than these?

@cameronpoole174 3 жыл бұрын

No 5mm in that hex set. How am I supposed to assemble my IKEA furniture?

@paulmendenhall5226 2 жыл бұрын

do you know the part number for the upgrade kit for the 3/8 metric that goes up to 24 m

@paulmendenhall5226 2 жыл бұрын

nice but everytime I look for them in 3/8 they are not available if i get them i want to get sae and metric but i haven't been able to find them or the add on set for metric 78319upd do they make a add on set for sae

@davereed6612 2 жыл бұрын

They’ve also got a 19 pc metric set 6mm-24mm no skips 78319

@davidwalle5025 3 жыл бұрын

Good tools and warranty if you do not have a regular tool truck. Did mr. Joe get his transit pos fixed yet. The diesel doctors and brent can do job. Keep the tool truck options coming.

@KoonTrucking 3 жыл бұрын

Nope he had to take it to another dealer. He acted ugly to the tech and they refused to work on it.

@samuelw.3992 Жыл бұрын

I have like 5 nano sets 😂 Love emmmmm

@silinusvers 3 жыл бұрын

have you ever put one one on a universal joint and compared its length to a swivel socket?

@KoonTrucking 3 жыл бұрын

I’m certain it will be more shallow just because of the depth of the socket ? I try not to use universals unless i have to do so. I mainly use these on the Nano impact or right angle. You can really get in some tight spots with these

@ChrisLopez-gq7vv 3 жыл бұрын

Have a question what’s the part number for 06 f350 Ambulance top Condenser the one that goes on ceiling

@KoonTrucking 3 жыл бұрын

You will have to get with the manufacturer that built the body. Just because it is a Ford doesn’t mean they are all the same. Ford just sells the truck as a cab chassis and a body builder does the rest. They are all different.

@dummkompf 3 жыл бұрын

Where are the 17mm and 22mm ratheting wrenches that have a retainer to hold onto the detents on the shanks of these sockets?

@AstroTools 3 жыл бұрын

Astro 78300

@beardedtoolreviews7185 3 жыл бұрын

Im kinda new here guys so please don't judge me. What do y'all think of grey pneumatic impact sockets and the company in general? Thanks

@anthonythompson4110 3 жыл бұрын

Those seem like great deals as long as their warranty is what they say it is

@KoonTrucking 3 жыл бұрын

Just send in a pic of the broken and they send you a new one. Pretty easy

@TheTheomax 3 жыл бұрын

You can never have enough sockets with that being said. I don't have any of these nano short dudes and I know Astro makes high quality tools. The price and return policy says it all for me.

@mr.sandman6873 3 жыл бұрын

Love it! Personally I’d swap the rail colors, black to metric and blue to standard, this way I don’t get them confused with my Snap-on sockets. But that is a great deal!

@WHATDATTOOLDO Жыл бұрын

Are the huskey and the sunex made by the same manufacturer?

@KoonTrucking Жыл бұрын

Pretty sure they are along with the Matco ones

@austinkelley5614 2 жыл бұрын

omg I didn't know they had a warranty!! Fuck ya

@asmautollc 3 жыл бұрын

I like the fact they put a hex at the base of the Nano sockets so you can turn them with a wrench too, or stick them in a ratcheting wrench.

@etchosts8162 3 жыл бұрын

Part number? Just kiddin 😂

@Toolaholic7 3 жыл бұрын

Astro Pnuematic,I have a good auto parts salesman I know that will warranty them not bought on Amazon

@fastrich75 3 жыл бұрын

Are the size engraved or laser etched ??

@KoonTrucking 3 жыл бұрын

Both its stamped and laser

@fastrich75 3 жыл бұрын

Thank you for the response

@agtech4580 3 жыл бұрын

So they are still lifetime warranty even if bought on amazon? I watched your video on not being able to get warranty on some items bought off amazon. They look like a set that could help me out of a jam I have the snapon low profile sockets but impact and larger sizes would be awesome great video

@KoonTrucking 3 жыл бұрын

Yes all they need is a picture of the broken tool. That’s it !

@benjamin_axios8926 3 жыл бұрын

Does Astro Pneumatic warranty if purchased from Amazon? Just asking to be sure.

@KoonTrucking 3 жыл бұрын

Yes send them a pic and they replace

@AstroTools 3 жыл бұрын

Amazon, Ebay, flea market, trunk of a car from a shady looking guy named Bisquick. If you bought them new, we'll replace for you

@evanperry3699 3 жыл бұрын

@@AstroTools what about his half-brother cornbread?

@AstroTools 3 жыл бұрын

@@evanperry3699 That would surely violate his parole.

@soundretarded 3 жыл бұрын

People are complaining about getting two 16mm in size & one being labeled a 17mm.

@KoonTrucking 3 жыл бұрын

Just notify Astro they will make it right. They are a good company

@soundretarded 3 жыл бұрын

Good to know that! Thank you!

@blainedamron8533 3 жыл бұрын

Thats a winner. Start testing some low priced ratchets.

@beardedtoolreviews7185 3 жыл бұрын

Astro vs sunex?

@KoonTrucking 3 жыл бұрын

No clue? I don’t have any Sunex stuff?? I know Astro is good and They are priced right !

@deathwishduenow 3 жыл бұрын

Astro is good so is sunex

@claytonscheiber3493 3 жыл бұрын

3rd

@jasonhill9502 3 жыл бұрын

1.1 of an inch ?????? How can you give a decimal measurement in imperial lol

@KoonTrucking 3 жыл бұрын

You realize a caliper reads out inch then a decimal point then tenths, hundredths and thousands, ten thousands right ?

@jasonhill9502 3 жыл бұрын

Clay, on this side of the pond (uk) we would have said an inch and and a 16th or 18th etc imperial or standard/sae to you. Just sounded funny to hear you mixing imperial and metric we would say 1.1cm as the .1 being a division of 10 mm or 1cm. loving the videos keep up the good work. You are lucky to have four fantastic tool trucks visit you. Well 3 trucks and a car lol ! poor mr Joe

@richb2229 3 жыл бұрын

@@jasonhill9502 on this side of the pond, it’s common to use fractional measurements or decimal measurements interchangeable. 1/8 inch = 0.125 and deep inch and so forth. It is a bit more complicated than the Metric measurements.