E80 | Top Speed:24000mm/min

E80 | Top Speed:24000mm/min | Super efficient

Рет қаралды 4,304

Жыл бұрын

🙋To be continued from yesterday...
Engrave 3 projects with different thickness all at once(Speed:24000mm/min)
The canvas frame size is 130mm*130mm
You can position more than 30 projects in the extension area(1030mm*750mm)
Just set all the parameters for the 30 projects first
Then wait aside
Only takes 3-5 minutes to engrave 1 project
Price already at discount
💥Extra Discount Coupon for subscribers:N88💥
Any suggestions for our livestream are appreciated.
🤎For the discount
neje.shop/
www.amazon.com/neje/
🤎For more information
Our Official Website:neje.club/
Join our FB group for inspirations: / neje.shop

Пікірлер: 10

@fddpr Жыл бұрын

next livestream is also about drawing pen. Would be great to have demo and setting explanation on lightburn.

@nejestudio686 Жыл бұрын

@kocibrylantpl-hodowlakotow3558 Жыл бұрын

Hello. I am glad that a new model was created, I like it very much. But WHY doesn't the Neje 4 Max have a cable chain like the Neje 3 Max???!!! It is very frustrating that when buying a newer and more expensive model, we do not get what the NEJE company has already achieved in the Neje 3 model... WHY ???!!! Regards

@nejestudio686 Жыл бұрын

We have tested that the X-axis chain may increase the coefficient of friction, so the current solution is to use elastic support bars. I will listen to your opinions carefully, and we will increase this requirement in future expansion.

@MartinSJ0 Жыл бұрын

Mit E40 bin ich schon zufrieden und begeistert. E80 bestimmt noch zacken schärfer,aber für mich noch etwas zu kostspielige.

@nejestudio686 Жыл бұрын

E80 is more suitable for cutting large planks, they have different application scenarios

@adrianonea8468 Жыл бұрын

congrats on fixing the microphone! sound is better

@nejestudio686 Жыл бұрын

Yay yay yay,thanks my friend!!

@shawnkratos1347 Жыл бұрын

What is the comparative power of the E80 to a co2 laser? Like 40w co2? Can the E80 engrave on glass without anything else?

@nejestudio686 Жыл бұрын

Diode lasers and co2 lasers cannot be directly compared in terms of power, but a speed comparison can be made. E80 can cut 3mm plywood at a speed of 900mm/min E80 can engrave on glass, but before engraving, a coating needs to be added to the glass. After the engraving is completed, just wipe off the coating