HOW TO SPRAY PAINT WITH THE RESTORATION COUPLE - so easy and quick! Cabin build series

Рет қаралды 26,858

Жыл бұрын

Now we can make some progress! Did you see the kitchen has arrived too?!
Sprayer we use - amzn.to/3Vi9Flt
SUPPORT THE CHANNEL
Our Patreon Page - / restorationcouple
Buy a Restoration Couple Mug - www.restorationcouple.com/shop/
CHANNEL FRIENDS & SPONSORS
Tractors at BLACKTRAC - bit.ly/3vZ2IL9
Speedy Tool Hire - bit.ly/3tXmUNu
ISOtunes Bluetooth Hearing Protection: bit.ly/AkC1x (Save 10% with code TRC10)
TOOLS WE USED - Affiliate Links
Laser Distance Meter - amzn.to/3OYdJEY
Hitachi Nailer - amzn.to/2TaAVTX
Bosch Impact - amzn.to/2RQxRuG
Bosch Combi - amzn.to/2QLS8BB
Swanson Metric Speed Square - amzn.to/2TlLJyG
Framers Square - amzn.to/2Q06Jfo
Framing Chisel - amzn.to/2Basl0p
Bosch Circ Saw - amzn.to/2QMXOuY
Stanley Tapes - amzn.to/2OJX3AZ
Chalk Line - amzn.to/2QIOeJu
CONTACT US
restorationcouple@gmail.com
OUR SOCIAL NETWORKS
Facebook - / restorationcouple
KZfaq - / therestorationcouple
Twitter - / restocouple
Instagram - / restorationcouple
OUR BLOG
www.restorationcouple.com/

Пікірлер: 60

@jonathanhasmail Жыл бұрын

Following your initial videos on this sprayer, I bought the same model. I’ve added a “whip hose” which is less stressful on the wrist when using the gun, I have also added a couple of tips (TT3 517 and Fine finish 208 - you need a new tip holder for these) and always use a gun filter. The last lot of paint (brand new trade emulsion) constantly blocked the tip without the gun filter, I then got through 20l without a single blockage. I’m about to finish taping and filling my loft bedroom ceilings, then it’ll be painting time 👍🏻Also, have a play around with the pressure. Find a scrap of plasterboard / blank wall, start with low pressure and gradually increase it until you get a “clean” edge to the fan, you’ll be surprised how low the pressure really needs to be with watered down emulsion (10% water).

@ProfessionalPainterDecorator Жыл бұрын

whip hoses are great, makes it a lot easier to use the gun.

@freddieleethompson3536 Жыл бұрын

14:40 It’s good practice to thin down final coats at least 10%. I’d also recommend straining the paint first or you’ll be forever turning your tip to unblock it. The amount of bits in paint nowadays is unreal. 🤜🏻🤛🏻

@ProfessionalPainterDecorator Жыл бұрын

Loving it, keep with it on the sprayer..... it's not easy is it ;) Just another tip... the knots on your woodwork... get yourself a rattle can of Smith & Rodgers BLOCKADE - white shellac sealer primer. It's brilliant to stop the knots coming through.. give a couple of spray coats from the rattle can, gives an even coverage.. it dries quick too.

@hernebaybob Жыл бұрын

Look how far you’ve come since all those trailer frame problems 👏🏼💪🏼

@kristapple Жыл бұрын

It’s all coming together now, looking great 😊

@mandyleeson1 Жыл бұрын

Looks so much brighter.

@richardphillips3303 Жыл бұрын

I'm pretty sure that one of my first videos of you involved spraying paint and I was hooked 🙂. Keep it going and I'll keep watching! Love your content on this and your other channel 👏

@julianturney9768 Жыл бұрын

As i work for Toolstation and we are cheaper on many products than screwfix i think you should mention us as well. 👍🏻

@ttfweb1 Жыл бұрын

I just sprayed out my basement today. Great minds... I've had my sprayer about 10 years, and it's a champ. After I run water through it to clean it, I suck a mixture of paint thinner and 30W motor oil (5:1 ratio) into the pump - displaces any water and lubes the pump. A friend of mine who's a pro painter gave me the tip. When I use it next, I'll use water to get the lube out, then load it with paint.

@54mgtf22 Жыл бұрын

Love your work 👍

@garethdavies7564 Жыл бұрын

i have the same sprayer i had my for about 12 months as i do painting jobs on the site defo whip hose makes life easier and before you start defo stain your paint weather if its new or old paint that way you wont get no filter or tip blocks for my first sprayer its payed for its self many times over if you take your time preping and masking up buy a good paint dont buy cheap... the finish its flawless 👍

@raydebbiemcdonald3208 Жыл бұрын

Looking great. That sprayer certainly did a good job.

@BillsCountrysideAdventures Жыл бұрын

Also tip... Put a cover over paint, I used to strain it into brand new bucket. Saves tons of time overall. Get hair in the trigger and irs bloody pain. Had this one and a big commercial one when I done building work.

@andychumley3680 Жыл бұрын

That's the way to do it Tim, saved yourself so much time, as apposed to using a roller, and you get over spray with that. 👍

@skiathosmobi Жыл бұрын

Great job👍

@turnbull321 Жыл бұрын

looks great

@nikoscoulson Жыл бұрын

Exactly the video I needed as I’m about to embark on a major spraying session. Brilliantly informative video as always.

@ProfessionalPainterDecorator Жыл бұрын

just take your time and don't rush it. it's all about, paint thickness, the correct spray tip and ..... the right pressure ;)

@radfoo Жыл бұрын

Sprayings great, I just have one of the air sprayers but if I have an empty room nothing is faster even with masking windows and wot not. Probably down to my lack of painting skills but also with spraying I get a much better finish.

@Dannyp8038 Жыл бұрын

What a great date night you guys had planned 🙂

@Chris-mn7yy Жыл бұрын

This is very therapeutic. I see why you use it, so fast.

@peterfriel5129 Жыл бұрын

First time using a sprayer yesterday i was shaking with nerves 😊

@JJ-zg1hh Жыл бұрын

What were you spraying? A Ferrari F40?

@frankklein4872 Жыл бұрын

Were you held captive and made to paint the dungeon you were imprisoned into?

@gdfggggg Жыл бұрын

That must have been some sprayer 🫣👀

@freddieleethompson3536 Жыл бұрын

14:08 - No need for the rubber glove. Just pop the gun in a bucket of water. On another note, when you’re finished with the sprayer run some “Pump Armour” through it (just the machine) before storing. You won’t have trouble getting it going again the next time you use it. 🤜🏻🤛🏻

@TheRestorationCouple Жыл бұрын

Yeah did pump armour with our Graco gun but clearly was in a rush with this one! 😬

@freddieleethompson3536 Жыл бұрын

@@TheRestorationCouple You, rush? Do you have a busy life or something? 😜

@alexstewart7652 Жыл бұрын

I put plastic bags on the ends of the electrical cables as many of them had information written on them, not hard. Then sprayed our new build, two coats in a day, easy

@rebootneeded7068 Жыл бұрын

Hello Tim and Jo and the girls, loving the channel, Im really enjoying the content especially the cabin build, because its something I’ll be doing myself next year. Which brings me to my question Do you own the copyright to the plans? and if so have you thought about selling them? What your creating here is similar to what I imagined for my cabin build, it would be great to use your plans as a guide

@chriscardwell3495 Жыл бұрын

Tim - that must be immensly satisfying -- suddenly all the rooms are painted and the place is transformed. Did you speed up the spraying action by x2 or x5 . . . or was that the real speed the paint was applied ?

@athloneduke Жыл бұрын

Cracking job.....wont feel it until house is weather tight and heat is on....

@sreval Жыл бұрын

If You Can Spray .....!! did our flat good finish.

@philipelliott5821 Жыл бұрын

You’ll be in for Christmas 😂😂

@gdfggggg Жыл бұрын

I’ll stick to the twelve inch roller and an apprentice thanks.

@richardstevenson2727 Жыл бұрын

👍

@stephenwhite5444 Жыл бұрын

Awesome work! Have you tried spraying the linseed paint? I've got a LOT of cedar to paint with linseed paint and thinking about buying a sprayer to see if it works good.

@TheRestorationCouple Жыл бұрын

No but it could be done. Probably need to use a compressor setup rather than airless. Worth trying if you have enough to do, maybe run a brush over last coat to give a more traditional look of needed.

@scott.whittaker Жыл бұрын

HOW have you got no overspray?! I have a decent size Wagner like that but I get so much overspray. Not sure what to adjust to get less really 😭

@markhinds254 Жыл бұрын

How is the main barn project coming on?

@TheRestorationCouple Жыл бұрын

Still going through planning 😒

@djcr_91 Жыл бұрын

Looking great, you’ll have a better finish in there than most homes! Out of curiosity, do you not need to use a drywall primer before applying paint? I’ve always mist coated plastered walls but was under the impression that a primer was needed for drywall. Best of luck with the rest of the work!

@ComeWhatThey Жыл бұрын

I think it's only "recommended" when painting to prevent moisture damage to the plasterboard from splashes and condensation, but often your paint will do that anyway. It's a lot more critical if you're wallpapering, because if you apply wallpaper directly to plasterboard without primer then that bond will be stronger than the board itself, so if someone comes along and tries to strip the wallpaper in future they'll have to destroy the boards to do it.

@djcr_91 Жыл бұрын

@@ComeWhatThey that makes sense, thanks for the reply 👍

@rtreborg8472 Жыл бұрын

It looks as though you are using Wickes Trade New Plaster paint - how effective is that at covering the Easifill plasterboard jointing compound?. I used Leyland Trade Contract Matt White and found even after 3 spray coats you can still see where the Easifill is when light hits it at an angle - so giving a poor quality finish.

@rhinoselim700 Жыл бұрын

How much paint was used?🤙🏾

@freddieleethompson3536 Жыл бұрын

7:40 - You only really get overspray when your pressure is too high. I noticed you had lines in your fan pattern. The paint is either too think or the pressure is too low. It can also mean a worn tip but you haven’t done a great deal spraying with it as far as I know. It’s not important on a mist coat but it will affect a final finish. Just something to watch out for. 🤜🏻🤛🏻

@TheRestorationCouple Жыл бұрын

Yeah that line on the right I assumed was the tip but could try increasing pressure next coat. Thanks. 👍

@shaw9673 Жыл бұрын

when do you expect to be able to live in it ....or is it just an expensive brew room while farming lol

@TheRestorationCouple Жыл бұрын

Some time in the new year planning permitting. Until then it is a glorified welfare unit! ☕️

@Martin-oz6lr Жыл бұрын

Lol I moaned about the time taken to tape up previously. I still would've given it two coats in the time it took you to set up the sprayer 🤣 Spraying rarely makes sense.

@jtrent90 Жыл бұрын

wouldn't like to see your finish. nearly every site i work on involves at least spraying of ceilings and mist coat.

@TheRestorationCouple Жыл бұрын

😂

@Martin-oz6lr Жыл бұрын

@jtrent90 Spraying makes more sense when you're Spraying multiple units and maybe a whole house for a mist coat. It's just the setup and cleanup coupled with the cost of either hiring or buying a sprayer outweigh the benefits. I do this day in day out for a living so I guess painting higher quantities is easier for me than a normal householder. No ceilings to worry about on this job either which makes it all the easier to blast out with a roller. If you're any good there shouldn't be a problem with the finished result.

@ttfweb1 Жыл бұрын

@@Martin-oz6lr It takes 10 min to set up my sprayer, 10 min to clean and lube it. It takes another 5 min to clean my gun. I've painted houses, rooms and cabinets with it - different feed rate and spray tips. If I use a 300 series tip, low flow and a few cardboard paint shields, I often don't need to mask much. Then I switch to a 500 or 600 series tip to pump out a large volume of paint. It took me a while to get good at it - now I spray most of the time.

@philipjames363 Жыл бұрын

Hi, I have an oak sleeper question, I am using oak sleeps to edge grass, 1 high, how best to anchor these to the ground, what stainless fixings? These will be on mottype1 but can add anything, ? Love your channel

@thediydadreading Жыл бұрын

You missed a bit

@rinwood123 Жыл бұрын

if you need more help or repairs on your spray machine i have a business called southwest Airless LTD

@clydedecker765 Жыл бұрын

Commenting on a video that is obviously days old is not a real aid or assistance but I do - occasionally. So, it seems that your tip is not quite right or you're spraying a bit too close to the wall and the coverage is not overlapping well. Too late now of course ...Watching your videos at the end of the day might allow you to catch that possible little error in your ways ... Sooner. So many providers are guilty of the same things because LIFE happens and they can't do nightly editing stuff. That's OK. I wouldn't be able to do it either I suspect. Even a review during "filming" might help?