Рет қаралды 10,944
Kirmuss Audio has revolutionized the way to not only clean but restore records, newly pressed or made 50 plus years ago. Using multiple 2 or 5 minute cycles, the process shown removes first left over residues from prior cleanings from the record's surface, then contaminants that were micro-welded in the record's release agent, then the release agent that came out of the pressing whether a week old or a record pressed 50 years ago. Dust and dirt that was micro welded into the release agent in the grooves by the heat generated by the dyne of the needle creates many of the annoying pops and ticks heard. With release agent removed using the Kirmuss process sees the breath and soundstage of the record restored. Restores 4 records simultaneously in 12 to 25 minutes. With the needle fitting in the "pocket" of the groove, therefore most surface scratches may not be heard. Sonics do not work in general as the record and the solution in the basin have the same charge thus repelling the generated plasma wave created through cavitation. This process changes everything.