TurboCharging an EG Honda Civic - Don't Skip These Critical Upgrades

TurboCharging an EG Honda Civic - Don't Skip These Critical Upgrades | PT2

Рет қаралды 64,689

Күн бұрын

Welcome to our 1993 Honda Civic EG with a B18B swap build thats about to get turbocharged!
Series Supported By Continental Tire: bit.ly/3YwVD1v
RestoTuner - www.restotuner.com/
KoyoRad Radiator: koyoradracing.com/products/ra...
Vibrant Fabrication Parts: vibrantperformance.com/
AEM 340PLH Fuel Pump: www.aemelectronics.com/produc...
Fluid Film Corrosion Protection: www.fluid-film.com/
BUY HERE: amzn.to/49syAu3
GarrettMotion GBC37-700 Turbo: www.garrettmotion.com/racing-...
Radium Fuel System Products: www.radiumauto.com/
GO AutoWorks Water & Oil Feed Kit: www.go-autoworks-store.com/
Honed Development Anti-Surge Mount: honeddevelopments.com/product...
Stripping Tech Powdercoating: / stripping_tech
Icon Era Parts B-Series Valve Cover: / icon_era_parts
Gas Tapper Transfer Pump: amzn.to/3P43DEo
SPAL 13-inch fan PN30102044: www.spalusa.com/
ID 1050X Injectors: injectordynamics.com/injector...
Continental ExtremeContactSport02 is our Recommended Tire for a Honda Civic: bit.ly/3YwVD1v #SpeedAcademyContinental
Join Our KZfaq Community: goo.gl/n4m3Ez
Our Patreon page: / speedacademy
BUY Merch Here: www.speedacademy.shop/
Support The Companies That Support Us:
Continental Tire: bit.ly/3YwVD1v
Valvoline: www.valvoline.com/
Turn14 Distribution: turn14.com/
Pit+Paddock: pitpad.com/
Konig Wheels: konigwheels.com/
Canadian Tire Pro-Series: www.canadiantire.ca/en/all-br...
Enkei Wheels: enkei.com/
Vibrant Performance: vibrantperformance.com/
Rays Wheels: rays-wheels.net/en/
ANNEX SUSPENSION: annexsuspension.com/
$125 OFF use code: 'SPEEDACADEMY'
Fluid Film Corrosion Protection: www.fluid-film.com/
AEM Electronics: www.aemelectronics.com/
DISCLAIMER:
Speed Academy videos are solely for entertainment purposes. Never perform any modifications to your vehicle that will void your warranty or in any way violate your local road going laws. We assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk.

Пікірлер: 160

@GleepGlop2 2 ай бұрын

Before the track video gets filmed can we start a petition to make a TMP lap time leaderboard in your shop, Top Gear style? You predict and talk about dyno numbers, but real world results are what matters. Like if you agree.

@L_RANTA 2 ай бұрын

100% agree!

@garnetreecejones9222 2 ай бұрын

Yes please

@alpinevicemotorsports1805 2 ай бұрын

Completely agree

@gregturner1029 2 ай бұрын

Nice idea 👌

@MyBridgestone24 2 ай бұрын

New England and rust go hand in hand. Ocean salt, road salt, margarita salt, bath salt, it never ends. Everything has rust.

@Bxud 2 ай бұрын

Margarita salt 🤣

@islandboy7271 2 ай бұрын

🤣🤣🤣You aint wrong

@RealBearFace 2 ай бұрын

*Cries in NJ*

@albertopena2964 2 ай бұрын

⁹tu I'm@@Bxudĥ😢 0:00 😢67⁷6th 89th is my lot 😮

@The96civicrider 2 ай бұрын

Rhode islander here, I can agree it's pretty bad

@maxrieker1591 2 ай бұрын

Been following you since the early 911 turbo videos. One of, if not the best car channel on KZfaq and motivate me to work on my own 911 and Honda civic. Keep up the strong work with the channel!

@fahisaurus 2 ай бұрын

Mentioning that "sales" price reminds me of my EG Civic sedan that had a declared sales tax value of $0.01. I still have the ServiceOntario receipt.

@Brandon-C. 2 ай бұрын

Back in 2011, drove my 95 hatch through Hamilton to the recruitment center from Saint Catharines. It was summer and with it being a CX with no AC... I got to taste the industrial area 😂

@uknterror508 2 ай бұрын

The golden eagle sandwich plate would be a solution to your turbo feed line

@markmartin7384 2 ай бұрын

Second Valve cover does look better!! Once again you guys are OEMplus Academy , love it

@mickl8212 2 ай бұрын

Fan shroud ducting to mount the fan to on the back of the rad. Ducting to direct the air flow through the intercooler and ducting to stop the air escaping from between the various radiators. If you don't do this, you WILL end up with cooling issues when the ambient temperature is high. Been there, done that.

@pinsandscrews6459 2 ай бұрын

Those MPG numbers are inflated, the EPA has changed how the mileage is determined, with one of the changes being the car has to be driven with the AC system running. Highway was tested at a constant 55mph with no inclines. City was done with minimal acceleration from stopped, as well as only going up to IIRC 30mph with the most efficient use of the manual shifting. This made it very very easy for the manufacturers to manipulate the MPG ratings. Today's testing is done in more real world conditions.

@StLightRaven 2 ай бұрын

For the oil feed, do a 1/8bsp to 4an/jic straight off the block, short braided line to a tee for the sensor, bracket off the block. Something simple like a p clamp around the hex portion of the sensor. You might need to come up with something better than that, but that's what I'd try first. Then the rest of the feed to the turbo. That should relieve all the stress off the fittings, and a short run of a few inches shouldn't affect oil temp readings. I've been using these bosch pst-f1 sensors for a few years now without fault. They're awesome. Great for fuel and even coolant.

@Motorheaddoc 2 ай бұрын

Radium products are simply amazing.

@shawnl1509 2 ай бұрын

To solve the leverage issue with the oil pressure/temperature sensors, you could always install an oil cooler/vtec conversion sandwich plate that has ports in it for sensors. An oil cooler might not be a half bad idea with a turbo car.

@Bob-ir4lr 2 ай бұрын

Just sold my b18b non vtec turbo build last year and i ran oil pressure/temp sensor same place with a bpst adapter never had a leak or issue in readings. Ran a sandwich plate on the filter for turbo feed also no leaks no issues at all.

@VS666 2 ай бұрын

so stoked for the first startup!!!

@BRICKHOUSESPL 2 ай бұрын

Engine bay is coming together beautifully! I mean if you're going to modify a clean example of one of these golden era cars these days then this is how it should be done!

@johnnyquest8333 12 күн бұрын

Waiting for my turbo kit from Go-Autoworks to ship for my B18C EG Hatch! My first project car and I cant wait, this was my high school dream car!

@gtiguy18t1 2 ай бұрын

I used an oil filter sandwich plate for my oil feed, oil pressure etc. just thread the oil pressure switch back in and take your oil feed etc from the sandwich.

@jeanbaker6638 2 ай бұрын

The valve cover is a nice subtle touch.👌🏻

@jaynuck 2 ай бұрын

Love this build. My first Honda was an LS Integra that I kept all motor but built a head for. I got as far as owning the components to go turbo and changed my mind, it’s fun to see this one come together.

@michaelrefuerzo9186 2 ай бұрын

Glad to see Pete getting better at welding. For more practice, please brace the intake.

@jessedrath2941 Ай бұрын

this guy is the definition of measure once cut twice

@g-mane7497 2 ай бұрын

Keep the content up guys. Love the videos.

@AK47xSNIPES 2 ай бұрын

Tractuff fitting with a remote mount line. Those T break off the block

@joshb3623 2 ай бұрын

I bought my 00 accord from original owner last year and guy went all out with every single receipt and even gas mileage records! Gotta love people like that

@aroundomaha 2 ай бұрын

Thanks! Another great blend of info and entertainment. I can’t wait to see the end result.

@ConiferConnoisseur 2 ай бұрын

Excited to see this rip!

@SystemScandll 2 ай бұрын

I'll say it in every video. Underrated content. Amazing work, love watching you guys.

@jacoblacroix9024 2 ай бұрын

Great job Peter engine bay looks awesome ! Can’t wait to hear the engine! Love all the black inside the engine compartment! Keep up the great videos

@BeansTune 2 ай бұрын

TracTuff! Rob has the fitting you need.

@fermillo65 2 ай бұрын

I really, really like your videos, guys. Thanks for all the effort.

@Mr99gsrteg 2 ай бұрын

Use the Acquity cube for the oil feed/sensor. absolute solid piece!

@GOAUTOWORKSYOUTUBE 2 ай бұрын

The Aluminum BSPT fitting is more ideal when screwing into the block than a steel fitting at that port. The ideal alternative is to use the Golden Eagle (filtered oil) sandwich plate...or some othersandwich plate. Great work

@louielou8262 2 ай бұрын

Man this EG is looking fresh!😍🔥👌🏼 That EF is so beautiful! Love both builds but if I had to choose, I'd go with the EG just because parts are still easy to find

@Mikeywelcs 2 ай бұрын

Love the honda content, your 1 of the only channels I watch the whole video and don't skip any of it and I'm always excited for you to upload a new video every Saturday. I wish there was 2 videos a week but owel 1 video is fine.

@hondanickx 2 ай бұрын

The oil temp and pressure sensor needs a piece of flex line and mounted on the firewall or somewhere else with a rubber grommet.Mounting it like you did will eventually faill from the engine vibrations and break.Never mount it directly onto the block ,specially with added adapters and sensors. There are remote oil sensor kits available .The temp difference on that short piece of line is non existing.Ideally your temp sensor should be mounted in the oil pan. The back of the block always reads higher temp because it gets heat soaked.

@kspec6131 2 ай бұрын

I love you guys and truly don't understand how you dont have Over a million subscribers.

@TrackSol 2 ай бұрын

I would ditch the oil tee and use an oil filter sandwich plate which typically have NPT ports for feeding turbos or the head in VTEC conversions. Bonus the oil supplied would be filtered.

@bigalalbig 2 ай бұрын

Love your work as always. I prefer the old valve cover! That look as some history behind it, like the Italian twin cam units of old. Either way, great job.

@wilayala11 2 ай бұрын

Use a sandwich plate on the oil filter and mount the line and oil pressure sensor on the plate

@Hunac-Ceel 2 ай бұрын

Cant wait to see this fire up for the first time.

@derksgarage 2 ай бұрын

We just outfitted our labs with the Mk4 Prusa printers, but this is on my list of wants for next year. Great video dude, I think we need an automotive video next using it!

@liam821 2 ай бұрын

Pretty sure you want the turbo coolant return at the top of the radiator, not bottom. Hot return from the engine also at the top.

@pepperfish_ 2 ай бұрын

LOL ALL of those headgaskets were done because of the d15 with no headstuds. lmao. The B18 needs ARP rod bolts and adjustable cam gears if you want to run higher boost in the top end (7000+). Your plan to use a larger turbo in order to raise the boost threshold is sound, but once the turbo spools it will need more cam overlap to flow enough air mass. If you are runnnng a hood exit exhaust then disregard. But if you plan on using a real exhaust system then you need to dial the cams in to get the best knock resistance. These are some of the best engines to boost.

@zerodrift1 2 ай бұрын

I'd remote mount the oil press/temp sensor. Progress is looking good!

@jahbrake9791 2 ай бұрын

Loving the series guys!!

@notone4029 2 ай бұрын

Love the Honda content. Out East in America the RUST and road Salt in winter is RUTHLESS!!! It eats cars alive!!!!!

@romeored3889 2 ай бұрын

At 13:02 Pete was gonna drop the f bomb 😂

@camaromike82 2 ай бұрын

I tapped into that oil pressure sensor port for my D16 CRX back in the day for a PSI gauge. I ended up remote mounting the whole deal onto the firewall using a flex line.

@edinkrusic2859 2 ай бұрын

Love your videos..hello from bosnia and herzegovina

@b18c5turbogt35r 2 ай бұрын

i always use the 1/8 npt when i turbo my honda/acura and had no problems

@Clark_R 2 ай бұрын

Loving this build as a turbo honda owner myself. Just a heads up though, you installed the Honed fuel pump antisurge kit incorrectly. The slotted section is for the hanger to go through it.

@gusplymale1797 2 ай бұрын

The composite d15 head gaskets were so prone to failure especially in warmer climates.

@Busydadgarage717 2 ай бұрын

Woot! Woot! Said the turb....oh, wait, that is choo choo! Either way, this is AWESOME!

@tyjonesmedia 2 ай бұрын

So happy you guys are building these Hondas. Basically our generation of hot rods 😂 can’t wait to see these things screaming at tmp

@LiquidSquidYT 2 ай бұрын

I really hate that yall don’t get the love you deserve.

@sataneatcheese6243 2 ай бұрын

The new rocker cover gives me Rover K series and Ford Duratec vibes. I would have kept the old one.

@fiercenet 2 ай бұрын

That bolt kit is sick... hoping they do Subaru soon.

@DanMosqueda 2 ай бұрын

I love the looks of the black piping too. It’s looking very nice. You guys don’t typically do this, but I wonder what the fuel economy will be with all of these upgrades?

@BoostedDC5 2 ай бұрын

I feel your pain New Jersey is just as bad with winter and rusty cars lol. I had to scrap my 96 Integra because of rust, was a very sad day.

@ThexGreatxLTS 2 ай бұрын

Next series should definitely be a Honda Fit build off

@andrewcowden9704 2 ай бұрын

Use hydraulic fittings. Steel BSP adapters are common. Use a BSP adapter and a run tee. On my Miata I use a BSP to JIC (works with AN fittings) and a JIC run tee.

@egeg-nr4qs 2 ай бұрын

SPEED ACADEMY!!!!.... I just want to warn you the EG hood doesn't clear the drivers side tank of the Koyo radiator. I had to clearance my hood with a socket and hammer to keep it from making the typical nasty gash. If you look at pics online you'll see every Koyo install in an EG has a nasty scar on the front edge just left (drivers) of the radiator cap. Koyo recently added the sloped face to passengers side upper tank to finally properly fit the EK, but completely neglected the fail-fitment in the drivers side for the EG. Cant believe this radiator has been on the market for almost 30 years and was never updated to fit its most popular application. Good luck!

@ominousg2 2 ай бұрын

Ktuned makes a nice multi port oil fitting adapter

@ominousg2 2 ай бұрын

KTD-OPS-AD3

@ballistic20vt 2 ай бұрын

great stuff

@boblast5582 2 ай бұрын

I kinda like the older valve cover better

@pFbSpecV 2 ай бұрын

Man I’m ready to hear it fire up!! You guys can easily make 300 to 350whp on this stock motor

@chrishuyler3580 27 күн бұрын

Spal fans, any fan, is super loud and not very efficient when you mount it direct to radiator. Simply adding a shroud that moves it away 1/2" makes a huge difference.

@lifeintheboondocks7516 2 ай бұрын

Man, just get an oil filter sandwich and call it a day, you wont have studf hangine off the block and waiting to snap off and its cleaner too

@frostyflowers4207 2 ай бұрын

Use the stainless steel 1/8 bsp oil pressure adaptor that screws right up against block with a washer

@starkyslp16 2 ай бұрын

Can confirm... salty Minneapolis roads do a number on our cars. Makes it much harder for the amateur mechanic to do any job under the car or with suspensions.

@erikfreeman4620 2 ай бұрын

Run a lsvtec sandwich plate for you oil pressure line

@timmytenders8536 2 ай бұрын

yeah are gonna have to get a powdercoat oven in there

@francoislo9025 2 ай бұрын

I use that same hose plier on my 1990 integra gas line and surly I broke the gas line since it was rusted 😂

@luisespinoza6139 2 ай бұрын

Maybe bolt on a bracket of some sort onto the block near the oil pressure sensor to support the weight??? Maybe

@elmerdeleon8480 2 ай бұрын

Man, if you only knew that the Eg civic have a drain bolt at the bottom of the gas tank...oh well, you still got it done and out

@speedacademy 2 ай бұрын

We did but had the pump out so it was the cleaner and easier method

@elmerdeleon8480 2 ай бұрын

@speedacademy Also, l, love what you're doing with the non vtec platform. They're just as reliable, if not more than it's vtec headed brother ...lol... I can't wait to see the outcome

@AHKracing1 Ай бұрын

Those Bosch temp/pressure sensors does not like to be mounted directly on the engine. Those are recommended to remote mount on a bracket. It’s because of vibrations from the engine.

@gar24407 2 ай бұрын

I would be cool to 3D print a heat shield or scoop to keep the hot air away from the intake.

@BaconGreaseMouthwash 2 ай бұрын

Lemon juice does a great job of getting the gas smell off your hands.

@MarioFunk 2 ай бұрын

In lieu of the fitting, a piece of strap as a support bracket would be a good interim solution.

@deanashleyhendricks5507 2 ай бұрын

Hi , I really enjoy watching all your videos and I like the track racing but do you guys do 1/4 mile racing ?

@derekrigsby2879 2 ай бұрын

i like the old valve cover better

@spoolinekrhdhulk-urban-c-w5709 2 ай бұрын

Watter wetter in the radiator and the other fan is fine i know i have it on mine its great 6:42

@konholio2 2 ай бұрын

Would have been nice to see you try squeezing AC as well.

@johnhewitt5693 2 ай бұрын

iTunes make a BSP stainless fitting with 1/8” NPT ports for that oil set up

@myldstyle4344 2 ай бұрын

Try supporting the oil union with a tab and an existing bolt hole....

@bgee461 2 ай бұрын

When i was running a water cooled turbo, if i remember correctly, i was using the coolant that normally goes to the throttle body/iacv? I dunno, it was like 20 years ago

@mistertherabbit 2 ай бұрын

“A pair of three” 😂

@robertct06 2 ай бұрын

Also Emissions affect fuel efficiency too

@oshanedawkins9269 2 ай бұрын

Was looking to see how you manage to fully install the AC in the car

@bk9609 25 күн бұрын

Canada merely adopted to the rust; Midwest US was born into it.

@dln.sweeney 2 ай бұрын

Funny, I've always preferred the older B18B valve cover design because it reminds me of the ones used on the RA16 F1 engine. The revised one always looked boring to me in comparison.

@streetztt2416 Ай бұрын

I usually re tap the oil port

@hondahacks1014 2 ай бұрын

Dont use the oil temp/pressure sensor. They leak and break. Look up the failure rate on them

@Gcoug69 2 ай бұрын

i own a Acura rsx typr S 2003 and i live in Québec , mannn its so hard to find a clean dc5 below 15k its crazy ! bought mine for 6500 in 2021 , and i love it ! but too much rust

@MrStanYoung 2 ай бұрын

I think the info in your video for the turbo water lines is incorrect. The cold water is at the bottom of the radiator so that should be your feed. The adapter to the frost plug is the return where your hot water from the turbo enters the block and flows upwards to the head and eventually back out to the top of the radiator.

@Motorheaddoc 2 ай бұрын

Looks like the deck needs to be machined. Wonder if over heating warped the head causing blown HGs