Is this the n18 or what motor is in this, I want to end up getting the r400 and reliably make 350 wheel
@zevisgarage16 сағат бұрын
@@solix9233 n18. You are going to need to build the bottom end to get to 350
@bigballermon5 күн бұрын
Oh Man!!! I got called out on World Wide KZfaq lol🤭
@morechuckyblood6 күн бұрын
How much power do you think it was making in this videos with no controller ? I would honestly be more than happy with this turnout. No need to up the boost if the internals are reliable at that hp for me personally. Also how much did you spend on this ? I did some research and I found the kit for 4.3k
@zevisgarage6 күн бұрын
@@morechuckyblood the R400TS is around that 4500 range. The original R400 kit like the one I have is around 7k new if you pay full price. It definitely made nice power but shortly after filming I turned down the boost to make sure stock internals would survive. I’m pretty sure it would last at the 18ish psi I was targeting before. As of about a month ago I’ve now forged the engine and am almost done with break in, about 1 more week before I turn the boost up
@Max-lj2zs6 күн бұрын
I have a 2008 mini cooper base (1.6) and it needs valve stem seals. Would main parts of this process work for my mini?
@zevisgarage6 күн бұрын
@@Max-lj2zs yup pretty much same procedure. It’s for a hardtop right, not a convertible correct?
@Max-lj2zs5 күн бұрын
@@zevisgarage yep hardtop, n12 engine
@zevisgarage5 күн бұрын
@@Max-lj2zs Yup same process. A mixture of this and my N16 timing chain video, but end of the day it's all 95% the same
@Blessedlungs6 күн бұрын
Reccomendations for tuning ?
@zevisgarage6 күн бұрын
@@Blessedlungs I always take it to Mario Palza, he is an RPM Power Distributor
@Blessedlungs5 күн бұрын
@@zevisgarage Thanks ! What can i do to get the car running right with a downpipe on ? Ive got a half filled engine light on my dash and the cars been slow, I was hoping tuning may allow me to delete the trouble codes and get it running right, does that sound right ? I noticed your downpipe doesnt have o2 sensors, is that something which can be deleted once tuned out ?
@zevisgarage5 күн бұрын
@@Blessedlungs my downpipe does have o2 sensors, I use the tune from Mario Palza to remove the CEL and P0420 code. You shouldn’t be getting the half filled engine light, that’s limp mode. You have another issue somewhere
@Blessedlungs5 күн бұрын
@@zevisgarage hmm okay, Thanks for all the info, I really apreciate it. I have alot to learn I have some error codes Related to Lambda probe after catalytic converter, So i assumed that was related to the o2 sensors on the downpipe. Is that something different ? For Reference, These are my Errors; 2C57: 0x2C57 boost pressure control, plausibility: pressure too low 2CB3: 0x2CB3 Wastegate, control: suspected fault in the wastegate control 2D13: 0x2D13 Lambda probe heating after catalytic converter, function: internal resistance too high 2D22: 0x2D22 Lambda probe after catalytic converter, electrical: line break Any Guidance is greatly appreciated !
@BBDos6 күн бұрын
i know you have done this more than once but how do you mark/label everything so you are certain on reassembly.? driver side of the motor is a rats nest!
@zevisgarage6 күн бұрын
@@BBDos you get used to where everything goes pretty quick after doing it a few times
@hackiesackfasho6 күн бұрын
Sickkkkk
@reaver3576 күн бұрын
Need to rip my exhaust off 😂
@bigballermon6 күн бұрын
You are going to make me build mine up lol
@zevisgarage6 күн бұрын
@@bigballermon It’s definitely worth it!
@bigballermon6 күн бұрын
@@zevisgarage 😬
@AdvancedSoul7 күн бұрын
didn't catch what you were doing when you were messing around with the digital menus in the tachometer. what was the purpose of that "reset"?
@zevisgarage7 күн бұрын
Resetting the oil change interval, if not the car will complain that it still needs an oil change
@PhilRounds7 күн бұрын
If you replace any lights with LEDs (R56) you'll get a warning because the lack of load fools the computer into thinking the light has burned out.
@naomicalian269612 күн бұрын
My car wont start without a jump . Among other things can that b part of a footwheel module bc everything else is good ? Thank you .ugh i already paid 2 x to get my module unbricked . Its been over a year and they obviously are not interested in fixing the module recall .im about to picket at mini untill they agree to replace it with a refurbished one . Why is no one suing :(
@rajivr10413 күн бұрын
Where did you get the r300 turbocharger?
@zevisgarage11 күн бұрын
I had a friend who was selling his. I'd recommend getting it through RPM, Mario, or Detroit Tuned
@garywatson377813 күн бұрын
I have been looking FOREVER to find the size of that hex nut. HARBOR FREIGHT HERE I COME!!!
@Eduardo_Espinoza13 күн бұрын
Did your key fob worked 100% no reprogramming required?
@zevisgarage11 күн бұрын
yes it worked, no issues with unlocking and such
@Eduardo_Espinoza13 күн бұрын
Is your plastic hood lever opener also broken?
@zevisgarage11 күн бұрын
no but it has a little more slack than I'd like
@JarynnQ15 күн бұрын
Came here because my ‘09 Mini Cooper Base reads CC-ID 031. Engine problem, Increased emissions. So how do I fix it?
@zevisgarage14 күн бұрын
You need to scan it with an actual scan tool. I recommend using the foxwell nt710
@Live_in_the_sunshine15 күн бұрын
How much is that ?$???? For mini 2011 hatchback hartop 2D manual
@zevisgarage14 күн бұрын
Used part prices vary. Now a days I send them to my friend who reflashes them, it’s a much easier solution than trying to find the correct part number and get it to match 100%
@Live_in_the_sunshine15 күн бұрын
What if the computer is on the other side ? (Passenger side ) Mecanic told me is that one the problem (have a mini 2011 59 k miles no accidents one owner. Al of the suden headlights won’t turn off, brake indicator on, check engine light on, AC blowing not hot or cold, turning lights or emergency lights won’t turn at all windows won’t go down. Mecanic told me is the Comintern module but is on the right side
@zevisgarage14 күн бұрын
If it’s the fuse box on the right side it’s the JBE Junction Box Electronics
@torque507016 күн бұрын
Good Job man 👍 Ich habe den gleichen Motor im Cabrio ❤😍 Der Motor ist etwas launisch aber wenn er läuft und gut abgestimmt ist, ist er einfach eine Bestie! Ich habe den Endschalldämpfer gewechselt. Habe jetzt einen von inoxcar dran und der mittelschalldämpfer von Ragazzon. Edelstahl downpipe. Auspuffanlage ab Turbolader in Edelstahl 😊 your Mini Sounds good. In der Nacht als du da rechts vorbeifahren tust dieser Sound ist einfach nur Gänsehaut 😍 i can hear this Sound 24-7😅 ehrlich ich könnte auf Arbeit usw den ganzen Tag diesen Motorsound mir anhören 😅 einfach nur eine Furie ! Wie eine wütende Furie schreit sie😅
@8draco817 күн бұрын
That bolt in the middle, holding the mount is an absolute pain to remove and it's 21mm in pre-facelift R53. I would advise having a special tool for the removal of that bolt.
@jetboy75317 күн бұрын
I have a 2010, to get it to stop having the halo’s on until you lock the car in did the following. The little harnesses that runs to the factory DRL‘s. I cut the plugs off and connected the red wires to the red wire that comes off the little black box. Then i used a tap a fuse and ran it off the F6 fuse in the engine bay fuse box. Only need to connect the ground wire for the black box. Now the halo’s shut off about 20 seconds after you shut off the car.
@zevisgarage16 күн бұрын
Good to know! I have been meaning to modify it
@jaydee138918 күн бұрын
I need to do this for my car but i dont have the tools. so i have to take it to a shop. they want 2800 for the job. it only has 40k miles. the check engine light gave a code saying the guides need to be replaced. but not the chain. but i figure if the guides gotta go then the chain does too...
@zevisgarage18 күн бұрын
What code? There isn’t a code that will say guides need to be replaced
@jaydee138918 күн бұрын
@@zevisgarage you are right. There isn't a code. The check engine light is on. First it was the solenoids, then the O2 sensor. I changed them. Then I changed the gasket cover. I took it to AutoZone and it says the guides need to be changed. The same codes came back. For the O2 sensor and the solenoid. I have a cheap code reader. Autel brand that I got from Amazon.
@jaydee138918 күн бұрын
It says 287D engine dme motor electronics. Dme vanos inlet: actuator movement. Status: not present. 2845 dme vanos exhaust actuator movement. Status not present I figured those codes are clear. But why are they there. Then it says 2A8B dme oxygen sensor before catalytic converter calibration line present. Idk what that one is. But maybe that's next to replace. AutoZone says replace the guides
@cesarvaldes616620 күн бұрын
Yo no presto atención en eso.
@1ruffell21 күн бұрын
What is a good brand or what cam lock set do you use?
@zevisgarage20 күн бұрын
OEMtools Schwaben also makes a Kit, I have several kits
@jorgemora719023 күн бұрын
Very good video thanks a lot
@ryand983423 күн бұрын
Appreciate the video! This helped me figure out what this little light is all about and how to fix it. It has been driving me nuts ever since I bought this car. Extremely helpful, thanks again!
@tm534625 күн бұрын
Oh it you I love this guys videos
@Melanie123d26 күн бұрын
Hello. This is a brilliant videoa, thank you. Is there an actual tube down the pillar from the hole in the sunroof or just a channel?
@zevisgarage26 күн бұрын
There is a short tube from the sunroof to the pillar I don’t think there is a tube inside the pillar
@wizzywilson26 күн бұрын
Thanks for the video. Ive just replaced my clutch and all the front end subframe bushes and ball joints on my R55 Clubman, when I put everything back together I have the exact same symptoms, I'm presuming its because I disconnected the battery. Terrible car design...
@zevisgarage26 күн бұрын
Yupp. Actually recently I did my clutch and I made sure not to disconnect the battery lol
@wizzywilson26 күн бұрын
@@zevisgarage Crazy, you try to do the right thing and it kicks you in the arse
@zevisgarage25 күн бұрын
@@wizzywilson exactly! It’s wild!
@silverlover581727 күн бұрын
Thanks for the video. I'm about to purchase a 2013 N16 Cooper with only 20,000 Mileage on it (it has been sitting in the garage lots of times), so do you think the timing chain should be okay on it?
@zevisgarage26 күн бұрын
Personally I’d probably replace it just because. I’m very extra like that. But in theory it should be okay. I’d recommend looking at the guides to see color and judge health
@tombanes28 күн бұрын
FYI don’t buy KYB get Lemforder which is BMW MINI . I spent $60 on each mount thinking KYB would be top of the line. They stretched as soon as I put them in . So I had to replace them after I did the full rebuild of each strut. I did it this way. It is super easy as the mini springs have very little movement when under load .
@zevisgarage26 күн бұрын
Good to know!
@johnhibbs6508Ай бұрын
Thanks for the video posting! I had a great time. I had the red 2006 S.
@FateIsSoulАй бұрын
Thanks for sharing
@henrydang1213Ай бұрын
Hi Zevi, do you work on other people's car? I sent you a dm on tiktok.
@zevisgarageАй бұрын
I do! Not often as my schedule is pretty limited right now but depending on the job I try to sneak a few cars in! I’ll message ya back on TikTok
@minitobe8525Ай бұрын
No Paceman!
@zevisgarageАй бұрын
There was a few I wanna say, just not in the video sadly. I think it was further up or something, it was near me for a while!
@TheEasilydistracted9Ай бұрын
I was hoping to spot someone else with a Bayswater like I have, but I guess they are a dying breed 😢
@zevisgarageАй бұрын
There was a lot of cars I didn’t film. I’m personally trying to see if I can find a Goodwood Edition in person
@silverlover5817Ай бұрын
Nice, which state was this at?
@876SIMSTREAMERАй бұрын
`*SoCal*
@zevisgarageАй бұрын
Cali
@reaver357Ай бұрын
I do like the look of that wide body though. Could put some bigger wheels on it next. Got me thinking about it 😂
@zevisgarageАй бұрын
One day I’ll design a custom rally inspired wide body kit for these cars
@jrh1704Ай бұрын
I was just watching the vid for fun because I'm bored and like you content. I've got an 11 r56s tuned with mods, boost pipes and all like this one. I've done all of my own oil changes and never removed the intake pipe. I just pull up the reservoir and use a long extension (actually 2 put together) to get to it. You can also push the transmission link/ bar to the left to give you some more room as long as you put it back when you're done. Not sure if that helps or if you do it like this normally
@anthonybelyea1964Ай бұрын
Thank you well done now I don't have to wait 7 months for BMW to do it👍🏼😎🇨🇦
@zevisgarageАй бұрын
😎 Ain’t no one waiting for BMW’s lazy attempt to fix the issue. It’s the one biggest complaint I have with these cars
@silverlover5817Ай бұрын
Did that break light fall by-itself! Or did you stage that? It's worrying that things are falling apart on those Minis......
@zevisgarageАй бұрын
Staged for the front bulb
@toyotabronyАй бұрын
U get ur money’s worth on Auxito led bulb replacements. Me and my family’s vehicles of two 2nd and 3rd gen Toyota Sienna, and my gen2.5 xB run with Lasfit, sylvania zevo, little bit of diode dynamics, and of course Auxito led bulbs. My most top three is Lasfit, Auxito, and Sylvania zevo for our cars and to anyone that needs help looking for the right automotive led lights. These I recommend at a very good price point. ❤️🔥❤️🔥
@zevisgarageАй бұрын
I’ve been super impressed with the auxito stuff, it’s genuinely pretty darn good for the price!
@toyotabronyАй бұрын
@@zevisgarage damn right man. We all know there’s cheap unbranded that are Chinese made. But these type of Chinese company are a great reputable brand ❤️🔥
@user-ss1le7sb9dАй бұрын
I m really know I Need to upgrade turbo K04 stigan or rev 9 it’s be the same quality to the oem Wagner
@zevisgarageАй бұрын
Neither turbo is OEM quality. The R300 is the only turbo I’ve seen that matches and exceeds it
@MehmetkirogluuАй бұрын
Bro you are brave. very nice video. Thank you so much :)
@zevisgarageАй бұрын
😎
@nnickers3355Ай бұрын
Love it. About to do this today. Saved me pulling out the whole shock.
@DanielJRinsOteroАй бұрын
Hola !!!! I’m Daniel, fron Spain. Your video help me a lot of !!!!!! 1.000.000 Tk
@zevisgarageАй бұрын
Thank you again to Auxito for supporting your boy! Here’s links to the bulbs featured in the video! Don’t forget to use code “zevisgarage” for 15% off your order! www.auxito.com/collections/11... www.auxito.com/products/1156-... You can also insert your vehicle on their website and the site will show you a list of bulbs that will fit your vehicle!
@user-sj3bq6yi1hАй бұрын
did you have your mini straight pipe?
@zevisgarageАй бұрын
Straight with just a resonator
@krashrambo513Ай бұрын
thanks so much for this video. you make it look so easy and explained it very well.
@zevisgarageАй бұрын
Thank you! That’s my goal, it can be tedious for first timers but it’s not bad when laid out clearly