Do you what pto model will fit a 1984 F250 4 speed t19 transmission? I know it has a 6 bolt pattern on the right and left side of the tranny.

Probably the best straight forward bottle jack repair video on youtube. Just rebuilt my jack with updated loaded u cupseals from "orings and more" very reasonably. Available in metric sizes as well and far superior to the import oem bottlejack seals. Thanks for posting!

Hola. Me podrías enviar por pdf ese manual de reparación de la bomba. Saludos de argentina. Gracias

Tractor sounds serious 👊

I'm sorry, sir, but I wasn't going to say anything, but you kept saying I can't find parts. Just type in model 5520B 20 ton bottle jack rebuild kit. Has everything from top to bottom.

Where did you find the o-ring for the small shaft? The 3mm x 7mm.

Quisiera explicación en español gracias

MUY BUEN VIDEO ,ESCLARECEDOR EN EL ARMADO Y DESARMADO DE LA BOMBA HIDRAULICA , GRACIAS!!

Thanks! I bought one of the log splitters that use a bottle jack and of course the jack started leaking, it's mounted on there so, kinda need that specific one to work. Gonna crack it open after seeing this!

I realize this is an older video, but I have to agree with you that they are near about a throw away item when they stop working correctly. IF you can find the unique "O" rings and seals, the typical cost is usually more than buying a new jack. But I still do try just for the fun of it...

I have 2 service floor jacks both 3 tons. I just dont understand why you would get a bottle jack instead of a trolly jack?

I have very similar pump here and i tore it apart it showed no sign of wear and check valves looks good

CE, any chance you can help me identify my PTO and pump? On a ‘69 C50 with the SM465 4-speed trans. No tag on the PTO, but the casting/stamping on the PTO case appears to be Ci-p-223. Pump casting number is 10-10733D. Pump tag says it’s a model number 102-C-0726-C. Hoping to identify everything so I can get the leaks stopped!!

This dude don't edit nothing out. A wonder we didn't have to watch him eat dinner.

Are the 2 bolts screwed into the endcap there to give you something to hold on to when you get the nut off on the other end?

What tightening values ​​do you have where the Teflon rings go? thank you very much from Argentina

I agree with you exactly how I stack my wagons.

My loader is very slow, oil level is fine, I replaced the screen and filters the back of the tractor, I think is one in the pump. Thank you

Where is the screen in this pump ? Thank you

Where can I get the parts aftermarket?

Is there a follow up to this, when you reassembled it?

How do you adjust your planting depth? Use stops on the cylinder? We have used a van brunt for the last 5 years and it has a screw adjustment but I'm not fond ng anything like that on the 8350 we just bought.

3010 is what I'm replacing with this pump. Thank you the video helped a lot

Isn't that amazing

thanks man that was great. i have mine apart right now and it looks in as good shape as this one. I also had a clogged transmission screen.

Why no new videos?

Well done master . God bless.

Through this entire video I squinted anticipating an explosion lol

Places like that where you really can't see very good them little mirrors come in handy stick it up in there see if the rollers on there and you're done I used not to use the mirrors at all but I found out they was pretty handy so I started using them especially in hard to see places a lot anyway dude I'm sure you probably have done this plenty of time so I'm just leaving a comment

Are these a geared type tractor... pick your gear for desired ground speed? Say like a 4-speed w hi/lo? Hydro drive? How wide are they with the front tires... tire outside to outside?

Thanks for that. Love the video!

Thanks.

Good 👍👍👍👍

If you can flip the guts around to have the shaft come out the front, can you flip it around to work on the passenger side of the transmission? I'd love to have one run a hydrolic winch but my front drive shaft will definately interfere. Its a zf5 juat like yours,, just have a BW1356 on the back. Thanks!

I grew up on Diary Farm in Calumet and Fond du Lac Counties Wisconsin ( most of the land was in Calumet county ) House, barn and other buildings and some acres in Fond du Lac County. My dad and later two older brothers ( Partnership after Parents retired ) had used this same Gleaner combine. Oats, soybeans, corn. My Dad’s day he combined for neighbors and one time I remember it was Buckwheat. Dad also cash cropped Red Clover ( Cut with a mower first and dried ). When I was about 5 and 6 years old, Dad would let me come along and I would lean up against the glass watching the crop moving through the head. Wonderful childhood. Memories !! When I was older and into teenage years remember the long hours of field work. Thanks for posting !!

GREETINGS PLEASE COULD TELL ME IF THAT PUMP COULD REPLACE THE RE33603 IN MY COUNTRY THERE IS NOT, IMPORTING IT IS VERY EXPENSIVE

GREETINGS PLEASE COULD TELL ME IF THAT PUMP COULD REPLACE THE RE33603 IN MY COUNTRY THERE IS NOT, IMPORTING IT IS VERY EXPENSIVE

Any idea what happened to du farmsabit?

Hey Mr Smith i just bought a 4055 from 1991 , somebody messed up the wiring in the tractor and ruined cowl and the plastic on the dash (grrrrrrrr) the tractor has run 8150 hours and the tank is leaking from the bottom . so my first problem JD has run out of plastic to the dash , is there any second hand seller you can refer too . my second problem is the tank (haven't removed it yet) i suppose some JB WELD can fix the problem . but would you cut out the rotted part and seal it with JB WELD or would you sandblast it and then seal it or what would you suggest ( i have the knowledge to weld on diesel tanks) . i live in DENMARK , EUROPE and i like your approach to the problems in front of you . So have a very nice day . Ivan Hansen

Now! I've a better understanding . Did you remove the ball and punch the seat. Great video!👍

Dumb question.. Can you turn when the planter is down? Or do you have to lift it up while turning?

Great old pictures of the farm. Thanks CE.

I'm wondering what if you put on a much thicker coat of JB weld, that might stop the leak.

Thank you for all your videos and helpful information! I have an 820 and have a really difficult time finding literature for repairs on it.

These pumps are an excellent design. I have had good luck over the years. Just never, ever run low on oil.

Hey man just checking on you. man hope everything's okay. waiting for your next video if you decide to do one on the Ford. If I can help or anything please let me know.

Subtitles in spanish please

Where we can get Kit to restore

Hey CE, What did you set the jets at? Main jet and the idle. Thanks 👍🏻🙏

How did you get the little ball underneath the flap in the center of the base