2002 Dodge Ram 1500 Engine Swap 4.7L Part 2

2002 Dodge Ram 1500 Engine Swap 4.7L Part 2 - EricTheCarGuy

Рет қаралды 173,273

13 жыл бұрын

Link to full version of this video: www.ericthecarguy.com/vmanuals...
Link to part 3: • 2002 Dodge Ram 1500 En...
Visit me at: www.ericthecarguy.com/
Well we are still working on it but I hope to get a 'usable' engine later this week and wrap this project up as I'm tired of looking at it. Thanks for sticking with me and all the great comments on the previous video.
---
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
ericthecarguy.com/
Visit EricTheCarGuy Forum
www.ericthecarguy.com/forum/de...
Visit my Facebook Page:
/ ericthecarguy
---
Stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Пікірлер: 268

@ericthecarguy 13 жыл бұрын

@vigorstyle916chino Glad you got it sorted, thanks for the update and the comment.

@ScottysDetailing 9 жыл бұрын

Funny how you have changed so much Eric. You sounded so sad in your older KZfaq videos. You didn't even have heat in your old shop? I can see the steam😡from your breath. I'm glad you kept making videos. Your seam much happier today. 😃

@MUSTANGVERDE 9 жыл бұрын

Is that goatee. Eric will shave it and things will back to normal .

@wyattklingensmith8862 5 жыл бұрын

I love the old eric the car guy videos been watching since I was like 13 and im 18 now and I know I have a lot to learn but i feel like ive learned a ton from Erics old videos just his tips and knowledge and way of explaining has made him an excellent teacher

@ericthecarguy 13 жыл бұрын

@KillerZero259 Thanks for that, I gave what I had I'm just glad when a video gets watched. Thanks for the comment.

@ericthecarguy 13 жыл бұрын

@dwillford I had the thought but I'll let them make good before I go there, I know I'd hate to be on the wrong side of the ETCG Army. I like that, perhaps a t-shirt.

@ericthecarguy 13 жыл бұрын

@ProjectCarTV Didn't go any farther than what was in the video but the scoring on the counterweight would indicate that there are probably metal parts loose somewhere inside the engine causing it to bind, perhaps the thrust bearing.

@ericthecarguy 13 жыл бұрын

@blazingtonight1 As for fuel consumption there are a lot of things that could come into play here, start with diagnosing any check engine lights you might have and then look to the basics like plugs, wires, air filter, and tire pressure. If you don't find anything there then look for vacuum leaks and check the output of the coolant temp sensor as this is one of the most important sensors for fuel economy.

@ericthecarguy 13 жыл бұрын

@finalman82 I think I had the same reaction. Thanks for your comment.

@ericthecarguy 13 жыл бұрын

@Kingsoupturbo It can be that way sometimes but it seems I was born to it and in many ways I'm grateful for that. Thanks for the comment.

@ericthecarguy 13 жыл бұрын

@DodgeMan360 Indeed it is, thanks for the comment.

@ericthecarguy 13 жыл бұрын

@bossthadal Not really, perhaps a little smoke. Transmission fluid and engine oil are very similar, transmission fluid has more detergents in it that can be beneficial in breaking up a rust ridge caused by an engine that has sat unused for a while.

@4x4PROX 13 жыл бұрын

Doing a great job Eric! Your interactive videos has made a little community of your friends here, people discuss, point at problems and come up with solutions. and you made it possible, Bravo!

@jesusmalgames 13 жыл бұрын

Eric I want to say I learn from your video and got great info of auto repair I wouldn’t get somewhere else. Professional will complain but should only give you suggestion but, we who are just learning appreciate the help. Thanks

@benjaminblack7018 4 жыл бұрын

I think you are a great mechanic and you have taught me lot in the few videos I have watched. You keep doing you, because you are great at it.

@ericthecarguy 13 жыл бұрын

@Figo1121 I'm sure that works for you but for me time is money and it takes much less time to replace an engine than it does to rebuild it properly. Thanks for your comment.

@ericthecarguy 13 жыл бұрын

@evilperson86u No worries, I kick it's butt in the end. Thanks for the comment.

@leslie-tolman 4 жыл бұрын

The fact that you're willing to make mistakes, be wrong and keep it a buck with the rest of us is what makes you a GREAT mechanic and human being, and what will teach the next generation of mechanics and people. Thank you.

@ericthecarguy 13 жыл бұрын

@AtreyusArchaicAvengr No offense was taken, thanks for the comment.

@briansmobile1 13 жыл бұрын

You're just awesome! I love your videos! I know these take a lot of time and effort and the quality is impressive.

@ericthecarguy 13 жыл бұрын

@gjmvi That was how the problem started with this truck, then there was this whole 'water in the oil' thing that was pretty much the kiss of death.

@ericthecarguy 13 жыл бұрын

@paxilill Yes I have and there have been other times where I wish I had. I think every mechanic has something they wish they didn't work on. Thanks for the comment.

@ericthecarguy 13 жыл бұрын

@Paki2c Thank you!

@bigbriautocrossing 9 жыл бұрын

Hey Eric I have watched most of you videos and i have to say it has been inspiring, i do this kind of work daily and still i find myself learning something new or finding a better way to jet a job done by watching your videos. Mechanic to Mechanic I SAY THANKS TO YOU! I lost my job about a year ago and and have been working on cars as my second profession to make ends meet, Keep it coming E.T.C.G.1. !

@ericthecarguy 13 жыл бұрын

@LeoKoneval So far they are doing what they can to make it right, if that changes however I will have to seriously consider your recommendation.

@ericthecarguy 13 жыл бұрын

@SwampBogger I'll find out this week. Thanks for the comment.

@ericthecarguy 13 жыл бұрын

@DieselCrawler86 What's funny is I found out today that the reason the water was there and the fuel rail was missing is because the took the rail out and pressure washed the engine. I asked them not to do that with the next engine they sent me.

@mraheelmujahid 12 жыл бұрын

The person who admits his mistakes or his weaknesses is a Great Individual. I liked really very much that you accepted your mistake rather than giving lame excuses. That's why I really like you Eric.

@ericthecarguy 13 жыл бұрын

@ChubbyLoveDumpster Your welcome, thanks for letting me know with this great comment I really appreciate it.

@ericthecarguy 12 жыл бұрын

@colinmartens I actually got rid of that engine when I moved so I won't be able to do that sorry. Thanks for the comment though.

@SteelRhinoXpress 10 жыл бұрын

you should be called Eric The Cool Car Guy, you're one of the coolest dudes on youtube. keep up the good work I have learnt a lot from you!

@ericthecarguy 13 жыл бұрын

@AngryGunNerd One is gas the other hot water, neither work. I have a small electric heater that I use but it only heats a small area in the shop.

@ericthecarguy 13 жыл бұрын

@TheTexasCoder First welcome aboard and second thanks for the great comment I really appreciate it. I'll keep your suggestion in mind should should they bring me another bad engine.

@odius94 13 жыл бұрын

I know how frustrating it can be dealing with bad part after bad part. Hang in there, man. Stay dirty!

@ericthecarguy 13 жыл бұрын

@HOYS Yep, in fact I went to the same website and only found 2.

@ericthecarguy 13 жыл бұрын

@eleeter Aparently the check is "in the mail" for the labor on the other engine. The funny thing is I found out today that the engine they sent me was pressure washed by them and they removed the fuel rail, I asked them not to do that with the next engine they sent me.

@ericthecarguy 13 жыл бұрын

@vigorstyle916chino Altering the suspension would be costly and time consuming, what you describe sounds like a damper problem so I would start by replacing the shocks. I would also check your tire psi as if they are overinflated it may exhibit the same symptom if they are.

@ericthecarguy 13 жыл бұрын

@JayEm7516 Their not haters so much as people who like to be right, I understand where they come from I just wish they would lighten up sometimes. The truth is I get a lot more positive feedback than negative but sometimes thats hard to focus on. Thanks for your comment.

@ericthecarguy 13 жыл бұрын

@jialunjiao The first thing I would check is the gasket you just replaced especially if the leak was not there before you started. Keep me posted on what you find.

@ericthecarguy 13 жыл бұрын

@ts46176 Thanks. I'll get it done, this week I hope.

@ericthecarguy 13 жыл бұрын

@6speeddakota I appreciate that, thanks for the comment.

@ericthecarguy 12 жыл бұрын

@djcatdog525 Not exactly, if you didn't do any machining then your 'rebuild' may not last as long as you might think, it's not just about replacing parts it's also about making sure the clearances are correct between them and for that a qualified machinist is your best friend. You also need to consider the time it took you to do the rebuild, if time is money then you have to factor that into your $650, a 20hr rebuild at $40 per hour (cheep) is another $800 for a total of $1450.

@francoisleblanc4985 5 жыл бұрын

Whoah, one of the best commentary I have seen in one of your videos ahah :) and ive been watching lots of these

@sicknessjb 13 жыл бұрын

live and learn Eric, I'm in the IT field and applies just the same. awesome job dude.

@justmyself1000 12 жыл бұрын

Eric, you are a stand up guy! I love your videos! It takes a real man to man-up to his mistakes, and you get an extra man-card points for that! If anyone ever wrenched, then you WILL know! I have the same truck, but an 03 with the 4.7. My truck runs fine so far, but watched for future reference and am thinking about buying one, then dropping an engine for my son. I learned sooo much! On the first engine being bad: I would've expected the junk yard to try it out.

@ericthecarguy 13 жыл бұрын

@agretz Cool, just don't get in trouble on my account watching my videos. Thanks for the comment and for watching at work.

@russianoleg 6 жыл бұрын

been battling with my 4.7L removal. this video is awesome. thanks for the insights☺

@ericthecarguy 13 жыл бұрын

@jtech23 Funny, the yard I called said the same thing when I first called them. Sometimes you just have to humor people, thanks for the comment, and even better for making this video worth while by letting me know that my mistake helped you.

@ericthecarguy 13 жыл бұрын

@phoenix11994466 I will keep that in mind, thanks for the input.

@ericthecarguy 13 жыл бұрын

@Michiganborn1969 The one I took out? Honestly I don't remember.

@ericthecarguy 13 жыл бұрын

@Begbucks Water doesn't belong in an engine, especially in the combustion chamber. Yes ice melts and turns into water but water is not compressible and if you start an engine with water in the cylinder you will bend or break a connecting rod. Would you risk it?

@ericthecarguy 13 жыл бұрын

@phoenix11994466 Well thanks for that comment and vote of confidence, I do try to entertain.

@ericthecarguy 13 жыл бұрын

@Cook1467 I found out today that is exactly what they did to this one. Why they took the fuel rail out before they washed it is beyond me however.

@ericthecarguy 13 жыл бұрын

@sleepinggiant90 I wouldn't call them idiotic, people do make mistakes, it's how they deal with those mistakes that makes the difference. I found out today that they actually removed the fuel rail and pressure washed the engine, I asked them not to do that this time.

@ericthecarguy 13 жыл бұрын

@Vidsandso Yea but ice turns into water and water in the cylinder can bend or break a connecting rod, I didn't want to risk it.

@Stratemannauto 13 жыл бұрын

Good call man, just keep your head up, i have rebuilt a yota motor for a buddie of mine and it kept blowing head gaskets after the build was done due to an over milled head, its hard to keep going back but you will get it done!

@bbgdaddy5198 10 жыл бұрын

LOL, you got it, I came to the video to try to get some tips as to what to avoid when I do my engine swap. Thanks for being my test dummy on it!!! good vid and thank you for making it!!!!

@HOYS 13 жыл бұрын

@EricTheCarGuy Good luck with the search...good luck with getting the engine in!

@chrismusic69 7 жыл бұрын

Much respect to you man. For admitting you make mistakes. I love your videos man and learn allot from them. Please keep them coming. Also do you have a way we can ask you questions for help with specific projects...

@Paki2c 13 жыл бұрын

@EricTheCarGuy no worrys eric happy 2nd birthday champ

@ericthecarguy 13 жыл бұрын

@Robinson4643 Actually the northstar head gaskets last year were worse.

@ericthecarguy 13 жыл бұрын

@fetthunderdome Thank you, I plan to.

@ericthecarguy 13 жыл бұрын

@chillincruisin I found out today that they actually pressure washed the engine and removed the fuel rail before they sent it to me, I asked them no to do that with the next engine they send me.

@SamPostema 10 жыл бұрын

I really liked your video. Well done, good quality, not a hack job like many of the auto repair videos I see on KZfaq.

@ericthecarguy 13 жыл бұрын

@andrewthompsonuk1 I already sent it back and to be honest I had little interest in that as I wanted the truck to run and go away. When I found out that I didn't have a usable engine I went home where it's warm.

@ericthecarguy 13 жыл бұрын

@orville58 Aren't those valves on the shelf next to the muffler bearings?

@ericthecarguy 13 жыл бұрын

@jialunjiao The blinking S light could be a problem, you may want to look into what code is stored for the transmission.

@ericthecarguy 13 жыл бұрын

@jialunjiao It may be coolant from the water pump. You can verify this by pressure testing the system and observing the area where you suspect the leak from. I cover this procedure in the Diagnosing an Overheat video. Good luck.

@ericthecarguy 13 жыл бұрын

@blazinloud In the end I'll actually get paid twice. The bad part is that it's kept me from getting other work done but I can't sweat what I can't change.

@ericthecarguy 13 жыл бұрын

@axenz1 I feel like I've made mistakes in a lot of my videos but I try to keep it to a minimum. That sounds like a cool idea though.

@ericthecarguy 13 жыл бұрын

@jerrhan I'm not rebuilding the engine, as I said too much time and money to do that.

@1elAguila 13 жыл бұрын

great one amigo really honest and some people appreciate all you do amigo good luck in the next engine.

@ericthecarguy 13 жыл бұрын

@RamblinAround Me too.

@ericthecarguy 13 жыл бұрын

@920gamez No need, they yard is paying my labor and sending me a new engine. I'm a little worn out from the experience but there really is nothing I can do.

@vigorstyle916chino 13 жыл бұрын

THANKS MAN,I ALREADY LOOKED ANOTHER SIMILLAR TRUCK AND THIS HOSE IS A BREATHER FOR THE CANISTER SYSTEM IT RESTS BEHIND THE DRIVERS SIDE HEAD BLOCK AND ITS CAPPED OFF BUT STILL BREATHS THANKS ALOT.

@ericthecarguy 13 жыл бұрын

@MrEmerce Actually the owner is pretty cool and at this point the story has a happy ending, part 3 Monday.

@ericthecarguy 12 жыл бұрын

@v7nf Thanks for that I really appreciate it.

@positivejames 9 жыл бұрын

Hey Eric I just ran into you on here. Great vids so far. Got a question well your opinion. Me and my buddy are doing an engine swap on my 2005 Honda Civic. Obviously it's easier to pull it out from top but do you think it would be just as easy to drop it from the bottom knowing its a little 1.7L?

@thefordmaniac 11 жыл бұрын

all dodge and chrsyler products (except jeep wranglers) are a pain to work on. dont fret! stay dirty love the vids keep em coming

@Razor_36 5 жыл бұрын

I work on diesel trucks, trailers and reefers. There are many things that the manuals don't tell you. Mistakes are just part of it. People love to tell you what an idiot you are when you make them but had they not known about it they would have made the same mistake. Sometimes I hate working with other mechanics because everybody's an expert. I think it's important to build each other up instead of trashing one another. Love your videos.

@BayouHotBoy1 12 жыл бұрын

Hey Eric! Great job by the way. No way I am going to replace my engine myself and wanted to know if you thought 2500 for a rebuilt engline and labor was a fair price? Thanks!

@ericthecarguy 13 жыл бұрын

@toyotavanman Thank you for that, I agree, there is very little taking of responsibility in this business, I hope to help change that if I can.

@hazelodonnell7658 11 жыл бұрын

I used insulation tape around the flex joint to stop it from flexing too much and it worked out really good.

@ericthecarguy 13 жыл бұрын

@philosifur1 Lets just say that over the years I've learned a thing or to about legal issues and as a result I'm careful about the things I say and do as a result especially here. Thanks for the comment.

@ericthecarguy 13 жыл бұрын

@CoolasIce2 They're paying my labor and sending me another engine, I hope that one works.

@ericthecarguy 13 жыл бұрын

@bowlingballout I don't wear a watch so probably not.

@ericthecarguy 13 жыл бұрын

@YosmanyLoudAndClear I do plan to do a series of videos on that at some point but in your case you would probably be better off just replacing the engine with a used one as it will be a lot less expensive and take a lot less time. Thanks for your comment.

@ericthecarguy 13 жыл бұрын

@TheGetawayer Don't care about the hands I just think it would be cool to hang out with you for a bit, perhaps we could borrow one of those cool cars you drive and spin it on the autobahn.

@reyhb1 13 жыл бұрын

Great vid, cant wait for part 3

@ericthecarguy 13 жыл бұрын

@golefevre Yep, I read Zen and The Art Of Motorcycle Maintenance when I was 17, haven't been the same since.

@pyrextv3967 9 жыл бұрын

You're the man bro , love your videos !

@ericthecarguy 13 жыл бұрын

@maddluckz Send me a PM with the video and I'll have a look.

@ericthecarguy 13 жыл бұрын

@ple3l5 I know I'm not perfect but I honestly have no idea what your asking me.

@AngryGunNerd 13 жыл бұрын

i saw your heater and that got me thinking: is it powered by natural gas or used motor oil? the ones that run on used motor oil seem pretty sweet, perfect for someone who does a lot of oil changes.

@ericthecarguy 13 жыл бұрын

@mazzmari I hope not.

@eleeter 13 жыл бұрын

Maybe it's time to find a new salvage yard? They don't seem too concerned about the conditions of their engines. A motor full of ice is pretty bad, I don't don't often see stuff like that even at my local PicknPull. For the complainers that say Eric should have checked the engine first, if you have ever worked on cars you know that when on a timeline, mistakes happen. There is no a mechanic alive that hasn't made mistakes! Appreciate the videos Eric.

@flyboynextdoor 9 жыл бұрын

ok, I answered my own question from part one, coolant in the oil and parts loose in the original engine. I want to rebuild mine or possibly a scrapyard engine.