2 жыл бұрын
5 жыл бұрын
5 жыл бұрын
6 жыл бұрын
Пікірлер
@thabangbusteric6173 Ай бұрын
I have the EXACT SAME PROBLEM!! this happened because I was tryna fix a drift stick. What's your handle. Can you please help me
@skifeverdude41 Ай бұрын
If this doesnt work the first time is it worth trying again?
@jeremiahblundon4877 Ай бұрын
Just bought an N64 at a yard sale. Dude plugged it in and showed me that it worked. When it got home it didnt read any of my old cartridges and even stopped reading the game that came with the N64 and the dude just used to show me that it worked. Was so confused on why it just randomly stopped working. Cleaned the games and cleaned the inside on N64 with a Q tip; thinking that's it's all it needed to be done to clean it. Came across your video and immediately tried it. Problem Solved. Thank you very much :D
@s1gnyt 2 ай бұрын
Still nothing for me. So I did all the steps and it still didn’t come on. I think my n64 game is fried and I need a new one.
@jorgexchapa7445 3 ай бұрын
nice job, it was more difficult than it seemd. glad that you didnt damage nothing else
@crypticscrutiny1153 3 ай бұрын
Might be a good practice to drop the FPC connector before heating. Just a hassle to balance properly continuing to heat board and tweeze drop your connector into a somewhat reasonable position. This obviously works but it has been easier in my experience to drop it first and then heat.
@ICExMikey 4 ай бұрын
Nes days they use to sell a tool with a fabric head(like a thin ,wide flat qtip) to rub the pins
@jacobbillups4715 4 ай бұрын
Is there an easy way to source the actual connector itself?
@KiloooNL 4 ай бұрын
AliExpress :)
@dr.resonance4461 4 ай бұрын
If the pads are still there I should have no issue soldering the connector back on without jumper wires right ?
@KiloooNL 4 ай бұрын
That's right
@brandongeorge4427 4 ай бұрын
It worked, thank you so much! My N64 has been in a box for 10 years.
@MUNDOM316 5 ай бұрын
Would this work with say like an old gameboy color?
@KiloooNL 5 ай бұрын
Yep - same principals apply.
@Heatlink1 5 ай бұрын
Hello!, I tried changing the entire Analog stick because of the drift, for some reason the controller still drifts, then I just removed the Analog stick, turn it back on, and Its magically drifting!, so it was never the potentiometer or the analog, it seems that it could be the board? Do you have any clue of what have happened? I cleaned every trace with soldering wick, there are no parts connected between them...I wonder.
@KiloooNL 5 ай бұрын
I've had replacement analog sticks that still drift. You could have received a dud which unfortunately does happen.
@Heatlink1 5 ай бұрын
@@KiloooNL Yeah, the analog stick had 2 potentiometers that drifted, so I had to change them aswell, and they were brand new!. I solved the issue
@w.stevenjf5910 5 ай бұрын
I have the same issue, but a tech told me mine was irrepeareable because there was a “video ic” not the lcd screen that causes the issue
@Vaniljebokhylle 6 ай бұрын
I did this, and now I can play Nagano 98. My other game, Diddey Kong Racing, does however still flicker. Any idea why? Could it be because of the memory pak or HDMI-adapter? Can I be certain that the cartridge and nintendo is cleaned good enough, when Nagano 98 works?
@Andrews2kx 6 ай бұрын
Use thetmal tape underneath and top to cover components/conectors for avoid damage
@crypticscrutiny1153 3 ай бұрын
I thought so too due to their being a cluster of micro components on the side you are heating from. Now I wonder if using heat transfer tape would just make attempting to heat the FPC connector pads from the underside a pain.
@Andrews2kx 3 ай бұрын
@crypticscrutiny1153 you can use just on top. Even use small a nail cutter to cut plastic parts and use your iron with low fuse solder but, hot air is better. 1 minute at 350 C you remove it. For soldering new fpc i use c210 tip.
@jeffh7145 6 ай бұрын
Thank you sir! Put the port back on on ps5 bdm-0020 controller. Used my phone as a magnifier, a regular soldering iron, and some strands of cat5e patch cable as tracers. She works!
@SodaGumX 7 ай бұрын
i have one som ebop\dy sprayed electrical contact cleaner in and now some buttons dont register.
@valmonta3647 7 ай бұрын
What if you have a lot of components on the underside ?
@yekuukey5592 8 ай бұрын
thank you I almost gave up trying to directly solder battery wires to the pads. But doing it this way turned out to be much easier again thank you
@ramonalavigne8953 10 ай бұрын
The alcohol that I have is 99%. Is that the same as yours and is it safe to use on electronics?
@KiloooNL 10 ай бұрын
Absolutely, no problem with 99% alcohol.
@menacemo5171 10 ай бұрын
Can i replace the lcd without buying a digitizer?
@ahmedladhibi6893 11 ай бұрын
Ty for the video, I have the issue that the start led goes blue then turn off, where should I test and what are the possible issues
@antonchao1519 Жыл бұрын
you need your switch to be rest so wala yung glitch
@arvinbantigue4903 9 ай бұрын
Sir bumalik ba yung sayo?
@armandobevard2 Жыл бұрын
Good job
@s1lly._.stringz Жыл бұрын
My little brother threw my switch and this happened
@dovahpie7168 Жыл бұрын
Awesome thank you! Would this work with other pin based consoles like the SNES, Mega Drive etc?
@KiloooNL Жыл бұрын
Yep, same principal applies!
@dovahpie7168 Жыл бұрын
@@KiloooNL great, thanks again! :)
@ICExMikey 4 ай бұрын
Some may need a new pin rack if damaged
@GovtWatchdog Жыл бұрын
Be VERY careful to not hit the board with the heat gun from underneath. I lightly hit it twice by accident and knocked off a couple of capacitors, one of which is now long gone.
@seek5373 Жыл бұрын
I needed this It happens to me because I raged while playing Cuphead
@r4mp4ge26 Жыл бұрын
Amazing video and the reason I now have a working NS lite! For anyone wondering, I use an 858D SMD hot air rework station and I found that 480° on air flow 6.5 (around 60-70%) to be the sweet spot, although others may disagree 🙂
@jorgejeovannyarmentarosas5480 6 ай бұрын
Sabes dónde puedo conseguir el conector que va en la placa que conecta la pantalla táctil???
@athenovae Ай бұрын
@@jorgejeovannyarmentarosas5480digikey, eBay, AliExpress, etc. :)
@madness3992 Жыл бұрын
Yo, what’s ur instagram? I’ve somehow done the same thing and I was wondering if I could pay you to fix it haha
@TalasDS Жыл бұрын
Wait, wait... The buttons click? No wonder mine keeps beeping at me. Must be stuck, I didn't even know they clicked...
@gkgaming3125 Жыл бұрын
So I am having this problem where I'm getting lines when it's connected to the tv but not when I'm playing portable what should I do??
@KiloooNL Жыл бұрын
It could be PI3USB chip or possibly the EMI filters.
@riquelmeneymar5515 Жыл бұрын
@@KiloooNL amigo ami nintendo le paso lo mismo , le salio esas rayas , no se me callo , ni mojo nada de eso , solo de repente le salio eso , aun asi podia jugar , pero hace dias ya la pantalla esta totalmemte negra , cuado le doy prender solo se ilumina seve q esta prendida , pero esta ya toda negra que ya noseve la imagen , me podrias apoyar para savet que es ??
@riquelmeneymar5515 Жыл бұрын
@@KiloooNL amigo ami nintendo le paso lo mismo , le salio esas rayas , no se me callo , ni mojo nada de eso , solo de repente le salio eso , aun asi podia jugar , pero hace dias ya la pantalla esta totalmemte negra , cuado le doy prender solo se ilumina seve q esta prendida , pero esta ya toda negra que ya noseve la imagen , me podrias apoyar para saver que es ?? , espero respuesta saludos gracias...
@NIGHTWOLFXP945 Жыл бұрын
I've gone through 2 PS4s because of roaches Poppin inside it
@ElonMuskrat1930 Жыл бұрын
Is there anyway to just see how it stopped working
@RadicalDamage Жыл бұрын
Yesterday I bought a gameboy Micro for $60 , at the beginning I was very happy until I noticed that the charging port was literally melted however that’s the only issue that I see, when I turn It on works fine so today I ordered the port from aliexpress wish me luck with this fix as this is the first time that i try something on a GBM 🙃🤣🫡
@KiloooNL Жыл бұрын
Good luck! You can do it :)
@jack53104 Жыл бұрын
How the components on the odher side not fell off?
@KiloooNL Жыл бұрын
The components at the factory use non-lead solder which has a higher melting point than our leaded solder we used to replace the connector, so you can get it on without heating it to the point the non-lead solder melts. It takes a lot of patience, practice and skill.
@jack53104 Жыл бұрын
So first you add leaded solder to decrease melting point? In the video you just show to heat from under.
@KiloooNL Жыл бұрын
@@jack53104 Ah right, yes I did add a small amount of leaded solder before filming to lower the melting point.
@nathanielpowell4790 Жыл бұрын
Thanks for the video! I just ordered a replacement port for mine and will be attempting the same repair once it arrives. Cheers!
@froeze Жыл бұрын
Big anything!! totally pointless modification. And why put so much solder?? brief arabic work
@amirahadi1384 Жыл бұрын
Thanks for video. Can you open the cartridge in order to straight up the pins easier?
@alexandralunaticspyro3413 Жыл бұрын
I use my nintendo switch lite for over 3 weeks..never drop it or do bad thing to this consoles and yet..my screen just be like this..bruhhh..should just stick to ps4..my ps4 still ok I use it for 6 years..and switch I use it for 3 weeks like..dude really?
@K2teknik. Жыл бұрын
When will the next video about modification to this multimeter come up ?
@Kippykip Жыл бұрын
Wow that worked! I thought I had two faulty N64 consoles hahaha
@fab5048 Жыл бұрын
How did you removed the old charge port? I saw a liquid, how it’s called? Thanks great video
@KiloooNL Жыл бұрын
Flux
@themerchandiser9546 Жыл бұрын
three years later brother and your still keeping our consoles alive!!! thank you!
@j.7231 Жыл бұрын
Thanks - Strait to the Point i like it!
@Silverturky Жыл бұрын
Hey man i really need some help with one of my systems. I have a NS1 system and it gets quite a bit of audio interference it's especially noticable in ocarina of time. I can hear lots of electronic noise in the background and every time i switch menus it changes to different sounds. At 1st i thought it was an output cap on the power supply but i replaced that and it's still doing it. How can I reach you to show you?
@Silverturky Жыл бұрын
Actually it might be the ns2 system I'll double check and make sure
@KiloooNL Жыл бұрын
It may be worthwhile replacing all the caps on the console to be sure. Are you using the original AV cable? The other thing that comes to mind is trying a different AV cable, as it may have some interference in the insulation.
@Silverturky Жыл бұрын
@@KiloooNL I've tried every possible combination of original / after market cable with different games I've tried different TVs and all. It's the NS2 that's having the audio interference. I think I'll just go online and order all the caps for it. Another thing now too.. the NS1 system i have has started freezing with any games that utilize hi-res mode. Perfect dark, Turok 2 they all freeze at random intervals and i get some artifacts on screen when they freeze. Some horizontal lines. Any ideas on that? I've tried the same expansion pak on both consoles and it works perfectly on the ns2. If i disable hi-res the games run fine with no crashing.
@mangobrasi4127 Жыл бұрын
I literally have tge exact same problem on my pro. Bought it from sumbody it turns then turns directly back off
@electronJarvs Жыл бұрын
These are fun amazing how many parts there is for such a small device
@luismlb Жыл бұрын
Can you Repair my I had the same issue
@ehern5475 Жыл бұрын
What do I tell them cause my nintendo switch game card cannot be read
@KiloooNL Жыл бұрын
Hey E, if you are in Australia, submit a quote request on our website - audiolink.com.au and we'll be happy to provide a quote