2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@jazziz09 2 күн бұрын
2 YEARS AGO and still not fixed
@Jimbo-in-Thailand 7 күн бұрын
@FlyingTheston - Glad you're still at it! Here's a tip for crosswind landings in a tricycle gear that always worked for me as a real pilot. Use your rudder pedals to keep the nose aligned with the runway while on short final. Use your ailerons to keep your aircraft from drifting left or right, i.e., keep your aircraft directly over the runway centerline and DON'T let it drift downwind as it's harder to correct in stronger winds. You can hold your nose aligned, low wing into the wind attitude all the way down to touchdown in a high wing aircraft, unless the crosswinds are severe of course. You will touchdown smoothly on the upwind landing gear, and with no side load, as opposed to coming in crabbing and trying to spike the touchdown with hard rudder to align the nose at the last second. My last airplane was a lightweight, but not ultralight, Rans S-12 high wing 2-seat side-by-side pusher. People were amazed at how smoothly I could land that little bird in fairly strong crosswinds. Cheers from Thailand buddy!
@FlyingTheston 6 күн бұрын
Still trying my best :D I don't want to be "that guy" and blame my tools, but I'm sure my cheapo CH rudder pedals are holding back my rudder work, they just don't feel sensitive enough, or it's just I'm struggling so much for it to just "click" with me, but when I try and hold the plane steady with the rudders, I just seem to shimmy and shake. I'm betting this is one of the things that flying a real life plane and mastering it there definitely helps over only ever trying it in a simulator.
@zsolteditor 9 күн бұрын
Unreal Weather - Live METAR 1.7 can't be downloaded from Gdrive. The reason: "We're sorry. You cannot access this document because it violates the Terms and Conditions." What can be done?
@leedwardstein2487 13 күн бұрын
what key combination do you use to select all the tiles in the scenery editor ?
@Aleksanderbigby 13 күн бұрын
The whole world isnt loading with real data. I re-downloaded it today and im wondering if theres anything to do
@oleksandrbykov5480 14 күн бұрын
Would that also allow seeing IPad on kneeboard, for ForeFlight, and would that be readable, in your opinion? Thank you!
@FlyingTheston 14 күн бұрын
If you already own a quest 3 then I'd recommend just putting it on and putting it in passthrough mode and looking at your ipad on your knee and see if you think it's good enough quality to read. In good lighting conditions, the quest 3 passthrough is pretty good, but an ipad at a range of what maybe 50cm may become a bit grainy? But it all depends on the size of the text you're reading. I tried a quick test with just my phone on my lap and it was "readable" but not amazing.
@AviationEdition1 17 күн бұрын
bro this looks TOO real
@richardgoldstein5600 17 күн бұрын
Best yet. Thanks.
@StinnMysterious 24 күн бұрын
This is way outdated
@traofficial0015 24 күн бұрын
Can you just add a light ball in sdk??
@Paradyski 25 күн бұрын
Update NET Framework through Windows Updater
@Pilot-V Ай бұрын
Hi great tutorial! i followed everything, the only problem i had is that once in the game it cut part of my immage... do you know what could be the issue?
@lucafymail7147 Ай бұрын
How or where did you get that radio stack, it looks awesome?
@FlyingTheston Ай бұрын
It's custom built with a 3d printed face panel, then a couple of dials/buttons for operation with the monitor behind it that runs the right side components. If you want to build your own then I'd definitely recommend watching Captain Bob's channel, he has a video on how to build a really good radio kzfaq.info/get/bejne/j62igcaLrpvHe2Q.html&ab_channel=CaptainBob
@lucafymail7147 Ай бұрын
Thanks 👍
@publicname515 Ай бұрын
This looks sweet, does anyone make these custom built cockpits anywhere?
@FlyingTheston Ай бұрын
I'm not sure if there's anywhere that builds custom cockpits at a reasonable cost (I'm sure there are ones that cost thousands), but half the joy is in the process of making it yourself :)
@delochent Ай бұрын
i know this is an old video, but could you create a video, how could we modify the glass cockpit windows, i am trying to figure out how to add scratches and fingerprint to existing planes but not sure how to
@memeswithoutcontext4716 Ай бұрын
Impressiv Setup! Let's wait till all the DCS flightsim builders discover this.😂 VR was always my excuse to not build a complete homecockpit, but i think i have to get startet.
@Grodstark Ай бұрын
Good this I mostly fly long haulers, Bing is good enough for me for that.
@thecow76 Ай бұрын
would be nice if developers provide a passthrough option in future by default
@FlyingTheston Ай бұрын
yeah that would be great if planes just came with a livery that had a magenta cockpit panel :)
@S.McDougall Ай бұрын
3 days, multiple attempts. no go. can save out package as dictated. msfs refuses to see folder created in community folder.
@Homework_777 Ай бұрын
can anyone tell me how to remove or add a star to an airport on the world map?
@BockstarkesBockbier Ай бұрын
What are your sensitivity settings? Looking pretty on point. Thanks!
@fwdskillzone1767 Ай бұрын
What an amazing enhancement for the X-plane for its drawback not utilizing the pass-through feature of the Quest 3. Could you create another video detailing the step-by-step process for implementing the pass-through modification? Especially focusing on how to seamlessly integrate the pink block into the aircraft model. Maybe Laminar Research should consider bringing you on board to make this a reality in X-plane officially!
@FlyingTheston Ай бұрын
This is for Microsoft Flight Simulator, not X-Plane. I'm sure you could do something similar on X-Plane but I'm not sure if the steps would be the same.
@nlhockey286 2 ай бұрын
How come it doesn’t work inside airport area?
@nlhockey286 2 ай бұрын
Is there a way to give a runway a smooth slope?
@virtuallyreal 2 ай бұрын
Just stumbled across your video, glad to see my masking method working for other titles😄 the result you got looks very good, great job.
@JoeSmith-zv4ic 2 ай бұрын
Thankyou for all your SDK videos. They've been a major help to me. Literally wouldn't have been able to do it without you. Thankyou! Would you know how to add items that are viable to be carried by helicopers? Can't for the life of me figure it out.
@jback6379 2 ай бұрын
Where were you able to get the SimpleScenery files, as the updated SDK doesn't have it.
@gagagu01 2 ай бұрын
Fantastic idea, sadly the pop out panels won't work anymore when MSFS is in VR mode otherwise it would be a great solution for my A320 panel. Thx for this video
@kristianjorg418 2 ай бұрын
I have just stumbled upon the mixed reality idea and looking up different solutions. This method of modifying the actual 3D model is absolutely genious. Did'nt even think that was possible. Great idea!
@Windsurfer7607 2 ай бұрын
Really great. May I ask you to make a short video how to generate and include that pink block? Many thanks in advance
@FlyingTheston 2 ай бұрын
This was the video I followed kzfaq.info/get/bejne/j698m8V1tMCtiHk.html&ab_channel=Wooselman and I'm not sure if I could do a video any clearer... The process is quite clunky and hard to follow, but it is what it is, just needs patience and perseverance. I'm happy to provide the cockpit gtlf for my JPL C152 if anyone would like it though :)
@pilotomaia 2 ай бұрын
Goodnight friend. Your video is very good, but time has passed, more than three years, and today I can't make transparent glass in my scenary. Can you help me ? Thanks hugs.
@pilotomaia 2 ай бұрын
Show !!! Tks a lot.
@melvilib 2 ай бұрын
What did you do to get sufficent levels of light for the passthrough? Mine is very grainy and I need to work out how to light it, TIA
@thestonefox 2 ай бұрын
The trick is lots of natural light if you can help it. artificial light seems to make the passthrough noticeably grainier. As my cockpit is right under a skylight it means the natural light covers it pretty well
@melvilib 2 ай бұрын
@@thestonefox Thanks for that. No natural light in my case, but I could create it with daylight matched LED light panels.
@baraskparas9559 3 ай бұрын
Fantastic presentation and realism. Smartest ever solution.Wider fov for you?
@rcbruce841 3 ай бұрын
how did you make the block and add it to reality mixer
@m0r94n 3 ай бұрын
first
@sirgriffinman 3 ай бұрын
@FlyingTheston where do you actually put the models you make for this cockpit passthrough? Would this work for a sim racing title like iRacing?
@FlyingTheston 3 ай бұрын
The model is the actual JPL Cessna 152 model and I've just used blender to inject a big pink block into that model, so when the game loads it loads the normal plane model but that model now includes my big pink block. I'm not sure if you could do the same with iRacing. You can always look into Reality Mixer on steam, that is an overlay application that runs over the top of any steamvr game, letting you add a passthrough block anywhere you want. It adds a bit of overhead though so it may make things a little laggier.
@yokoh691 3 ай бұрын
How did you fix the reality mixer stutter with msfs Works great with my DCS and other flight sims but I get a stutter with msfs only with reality mixer 3080ti
@FlyingTheston 3 ай бұрын
I'm not using reality mixer, I'm just using the built in colour passthrough function built into Virtual Desktop as I found reality mixer to give me a laggy overhead too.
@yokoh691 3 ай бұрын
@@FlyingTheston big thanks! Gonna do that, didn’t realize Vd had its own now aha
@m0r94n 3 ай бұрын
first
@lovelyapple7167 3 ай бұрын
what is your mix reality system and how did you connect it to sim?
@FlyingTheston Ай бұрын
I'm using the passthrough mode on Virtual Desktop to only apply passthrough to a magenta colour, which I then mask out in the plane model. You could also look into SimXR for an easier alternative to this.
@Barcikowy 3 ай бұрын
in 2024 there is no Samples directory in MSFS SDK :(
@julianlockwood3040 3 ай бұрын
Brilliant !
@japp3playzz 4 ай бұрын
Lol awesome cockpit, mate! Tons of worjk there!
@japp3playzz 4 ай бұрын
wow great tut and very nice idea to use the windows to remember the area to select with the polygon :) . Thanks Theston for all this. Have a nice day!
@rbarlow 4 ай бұрын
Brilliant. I mentioned this in my early Mixed Reality video but didn’t know how to modify the model. Could you do a step by step video on the process of creating and modifying an aircraft to include the color keyed panel replacement?
@FlyingTheston 4 ай бұрын
Your video was the one that inspired me to try the mixed reality cockpit in the first place! This was the video I used to add the custom model, it's quite an involved process and I'm not sure I could make a video that was any clearer kzfaq.info/get/bejne/j698m8V1tMCtiHk.html&ab_channel=Wooselman
@rbarlow 4 ай бұрын
@@FlyingTheston Thaanks....I'll check it out. I really found your early scenery creation tutorials helpful. This approach is the best DIY implementation of MR I've seen. Realitry Mixer is just too difficult to get setup and aligned. I also prefer VDXR too and no steamVR overhead. What is really needed is a plugin that could interject the color keyed object into the cockpit and to resize and align it. Perhaps a .obj modeled in Tinkercad so that anyone could create it without much skill. This is definately the future,
@nonamemcnotaspy8654 4 ай бұрын
Can you make an updated video, it seems that a lot has changed and some stuff you show no longer works
@jonmabec 4 ай бұрын
This is the best example of an affordable mixed reality cockpit I have seen so far! I am currently building my own, King Air one!
@FlyingTheston 4 ай бұрын
Thanks for the compliments! I hope your King Air one goes well, I'd love to see a video of it when its fully built!
@jonmabec 4 ай бұрын
@@FlyingTheston You bet! I would love to see more of yours as well! How is the readability of the instruments from air manager? Is the Quest 3 passthrough sharp enough? I am planning to use an external camera ( Stereolabs Zed Mini) attached to a Bigscreen Beyond.
@FlyingTheston 4 ай бұрын
@@jonmabecThe readability of the instruments is "fine" as much as in I can read them for the most part, but small details on them is just lost. Like I'd never read the kollsman window. But for the most part, its all fine, I can see what I need to see and I have the altimeter dial set up so when I press it, it just sets the altimeter to whatever atc says.
@Sailor92 4 ай бұрын
after i "export" from that program, and open my project in MSFS , i have UNKNOW error in Scenery Editor :((
@tomasmenezes3683 4 ай бұрын
I LOVE YOU MAN, life saver, it was a headache to get it all done correctly the first try but finally did it, thank you so much!
@ChokDK-bryllupsmusik-duo 4 ай бұрын
OMG you're back!!!!! Let me please say thank you thank you so much for all your fantastic videos that have helped me making content for MSFS 2020 and/or learn more about the sim. Ohh and uhm.. "we" need to know how to insert an active marshaller to a helipad :D
@FlyingTheston 4 ай бұрын
glad you're making content with help from my videos! I've not touched the SDK in quite some time to make anything new, they kept making so many changes to it that it became hard to keep up to date with!
@Uzair823 4 ай бұрын
You did not mention I need the SDK or how to get one, wasted 1 hour on this